發布時間：2018-02-21 07:38

  本文關鍵詞： 物料基礎數據 物料清單 產品族物料清單　出處：《廈門大學》2014年碩士論文　論文類型：學位論文

【摘要】：本文以RC公司ERP物料基礎數據構建的過程為研究對象,根據ERP系統對物料基礎數據的要求,研究了物料基礎數據構建的內容、方法和步驟,以及保證物料基礎數據質量的措施。構建完善的物料基礎數據不僅為ERP運行準備了條件,還可以縮短產品設計時間,進而縮短整個產品生產周期,增強企業的競爭力。 首先,介紹新成立的RC公司需要引進ERP系統作為其供應鏈管理的IT平臺,分析了ERP系統順利運行對物料基礎數據的要求,即需要對物料及其屬性進行識別,需要調用產品結構數據實現生產計劃。接下來圍繞ERP系統對物料基礎數據的需求,對物料基礎數據構建的內容、方法、步驟展開論述。通過分析市場對企業不斷變化的要求,指出目前以傳統方式構建的物料基礎數據已經不能夠滿足企業大規模定制生產的需求。于是引入產品族物料清單的概念,為產品結構數據模型的構建引入新的方法,即將產品設計和配置分開。物料基礎數據的構建還要緊密結合企業的實際情況。第三章對RC公司的成立背景、產品結構和生產流程進行詳細的介紹和分析。第四、第五章在前面的理論分析結果和企業實際情況的基礎上,展開RC公司物料基礎數據的構建,即對物料進行分類、編碼,規劃物料的屬性,建立典型產品完整物料清單,并針對具體訂單要求對實際產品進行配置。 最后對整個構建過程進行回顧,總結了按研究的方法構建的ERP物料基礎數據構縮短了RC公司產品的設計時間,進而縮短了產品整個交貨期,為提高運營的效率做出了貢獻,提升了應對市場不斷變化需求的能力。還指出,物料基礎數據在技術信息系統和管理信息系統之間起到了橋梁連接的作用。RC公司為了實現產品整個形成過程的信息化管理,已經立項準備引進技術信息管理系統進一步規范物料基礎數據的構建。
[Abstract]:This paper takes the process of ERP material base data construction in RC company as the research object, according to the requirement of ERP system to material foundation data, the content, method and procedure of material base data construction are studied. The construction of perfect material base data not only provides conditions for the operation of ERP, but also shortens the product design time, thus shortens the whole product production cycle and strengthens the competitiveness of the enterprise. First of all, this paper introduces that the newly established RC company needs to introduce ERP system as its IT platform for supply chain management, and analyzes the requirements of the smooth operation of the ERP system on the material base data, that is, it needs to identify the material and its properties. It is necessary to call the product structure data to realize the production plan. Next, the content, method and steps of the material base data construction are discussed around the demand of the ERP system for the material base data. Through the analysis of the changing requirements of the market for the enterprise, It is pointed out that the material base data constructed in the traditional way can no longer meet the needs of mass customization production, so the concept of product family bill of materials is introduced, and a new method is introduced for the construction of product structure data model. The construction of material base data must be closely combined with the actual situation of the enterprise. Chapter 3 introduces and analyzes the background, product structure and production process of RC Company in detail. 4th, In Chapter 5th, based on the previous theoretical analysis results and the actual situation of the enterprise, the construction of the material foundation data of RC Company is carried out, that is, the material is classified, coded, the attributes of the material are planned, and the complete bill of materials for typical products is established. And according to the specific order requirements for the actual product configuration. Finally, the whole construction process is reviewed, and the ERP material base data structure based on the research method is summarized, which shortens the design time of RC products, and then shortens the whole delivery time of the products, thus contributing to improving the efficiency of operation. It also points out that the material base data acts as a bridge between the technical information system and the management information system in order to realize the information management of the whole forming process of the product. A project has been proposed to introduce technical information management systems to further standardize the construction of material base data.
【學位授予單位】：廈門大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：F273;TP315;F270.7

【參考文獻】

相關期刊論文 前2條

1 周耀烈;繆苗;;國際產業轉移與長三角地區的產業升級[J];商業研究;2006年13期

2 朱華鋒,譚建榮,李伯鳴,李濤;MRPⅡ環境下制造數據管理系統的開發及其關鍵技術研究[J];中國機械工程;2001年08期

，

本文編號：1521395