鋼管再生混凝土柱-H型鋼梁外加強環式節點抗震性能研究
[Abstract]:At present, under the guidance of the development policy of "energy saving and emission reduction" and "green environmental protection", the disposal of construction waste has become an important problem that needs to be solved urgently for sustainable development. The emergence of recycled concrete technology not only solves the difficult problem of waste concrete, meets the demand for concrete in contemporary society, but also saves the natural aggregate resources, alleviates the contradiction between aggregate supply and demand, and is beneficial to the protection of the environment. It's a green concrete. In order to solve the problems such as easy cracking, low strength and poor elastic modulus of recycled concrete, the recycled concrete filled steel tube structure was developed with reference to the form of concrete filled steel tubular structure. The joint connection between recycled concrete filled steel tubular column and steel beam is the most important part of the whole composite structure system of recycled concrete filled steel tube, which plays an important role in the distribution of internal force in the recycled concrete filled steel tube frame structure. The transmission of bending moment has the function of guaranteeing the overall stability of the structure. Especially when the structure goes through a large earthquake and enters the yield stage the Liang Zhu joint connection plays an important role in the integrity and stability of the composite structure. This paper focuses on the seismic behavior of steel tubular recycled concrete column-H-type steel beams with external reinforced ring joints under low cycle reciprocating loads, and finds out the main factors that affect its seismic performance. The problems existing in the application of concrete-filled steel tubular joint Liang Zhu are optimized and improved. The main research contents are as follows: (1) according to the actual engineering design, seven scale models are designed according to the 1:2 scale ratio. The main influencing factors are as follows: axial compression ratio, Liang Zhu line stiffness ratio, combined action of recycled concrete floor slab, etc. The influence of high strength bolts on the seismic performance of composite concrete composite slab and core area of profiled steel sheet. (2) the hysteretic curve, skeleton curve, stiffness degradation curve and strength degradation curve of beam end are drawn by using the measured data, and the energy dissipation capacity is analyzed. The ductility coefficient, equivalent viscous damping coefficient and other seismic indexes lay a solid foundation for the application of recycled concrete filled steel tube structure in engineering practice. (3) the fine three-dimensional finite element model is established by using A N S Y S finite element software. At last, the numerical simulation results are compared with the results of the specimen to find out the law of change. The experimental results show that the hysteretic curve of the specimen is full and the energy dissipation ability is strong. Liang Zhu's line stiffness ratio has significant influence on ultimate bearing capacity and energy dissipation capacity of specimens, and has great influence on the seismic behavior of joints, while the change of axial compression ratio of columns has an effect on the bearing capacity of specimens, but the influence is not obvious. The increase of axial compression ratio leads to a slight decrease in ultimate bearing capacity and the ductility of the specimen, and high strength bolts can effectively reduce the shear strain in the core area, but the effect on the ultimate bearing capacity and energy dissipation capacity of the specimen is not obvious.
【學位授予單位】:西南科技大學
【學位級別】:碩士
【學位授予年份】:2017
【分類號】:TU398.9;TU352.11
【相似文獻】
相關期刊論文 前10條
1 張建軍;薛萍;;I和H型鋼梁的臨界彎矩修正系數研究[J];公路交通科技(應用技術版);2009年10期
2 賀玲鳳,潘桂梅,小林昭一;利用激光超聲測量H型鋼梁的殘余應力[J];華南理工大學學報(自然科學版);2001年07期
3 朱奇;李國強;;波紋腹板H型鋼梁受壓翼緣局部穩定研究[J];工程力學;2014年09期
4 張貴國,胡啟平;楔形變截面H型鋼梁內力分析的傳遞矩陣法[J];河北建筑科技學院學報;2003年01期
5 朱奇;李國強;;波紋腹板H型鋼梁受壓翼緣局部穩定理論研究[J];佳木斯大學學報(自然科學版);2014年03期
6 李曉東;董毓利;叢術平;;H型鋼梁(端板連接)火災行為的試驗研究[J];哈爾濱工業大學學報;2006年06期
7 莊磊;;方管柱-H型鋼梁隔板貫通式節點抗震性能的研究[J];建筑結構;2008年09期
8 劉清平,王靜峰;采用H型鋼梁與碳纖維布加固在工程中的應用[J];結構工程師;2004年06期
9 趙興龍;張秀華;劉晚成;;H型鋼梁與方鋼管柱連接框架抗側移剛度有限元分析[J];沈陽建筑大學學報(自然科學版);2010年06期
10 劉歡;姚勇;褚云朋;楊亞龍;;鋼板墻對方鋼管柱-H型鋼梁邊框抗震性能影響的數值模擬[J];鋼結構;2012年S1期
相關會議論文 前3條
1 李黎明;李白剛;陳以一;;冷彎方鋼管與H型鋼梁外套板式節點抗震性能研究[A];慶祝劉錫良教授八十華誕暨第八屆全國現代結構工程學術研討會論文集[C];2008年
2 賈昊凱;李世強;吳桂英;;H型鋼梁在爆炸荷載作用下動力響應的研究[A];第十屆全國沖擊動力學學術會議論文摘要集[C];2011年
3 王新武;楊紅霞;孫洪剛;;H型鋼梁柱T型連接的研究[A];第二屆全國現代結構工程學術研討會論文集[C];2002年
相關碩士學位論文 前10條
1 張志雄;新型方鋼管柱-H型鋼梁拼接外夾筒式節點靜力性能研究[D];中國礦業大學;2015年
2 張燕;波紋腹板H型鋼梁頂?shù)捉卿撨B接半剛性節點研究[D];河北工程大學;2015年
3 許晨;方鋼管柱-H型鋼梁全螺栓連接隔板貫通式節點抗震性能研究[D];河北工程大學;2016年
4 裴升;波紋腹板H型鋼梁整體穩定性研究[D];鄭州大學;2016年
5 焦健;方鋼管與H型鋼梁全螺栓節點承載力試驗研究及有限元分析[D];石河子大學;2016年
6 程威;鋼管混凝土柱-H型鋼梁框架節點力學性能試驗研究[D];重慶大學;2016年
7 吳瓊;方鋼管柱-H型鋼梁剛性連接點抗震性能的研究[D];遼寧工業大學;2017年
8 徐羊;鋼管再生混凝土柱-H型鋼梁外加強環式節點抗震性能研究[D];西南科技大學;2017年
9 楊洋洋;梯形波紋腹板H型鋼梁的力學性能研究[D];西安建筑科技大學;2013年
10 金飛;H型鋼梁與圓管柱連接節點的受力性能研究[D];重慶大學;2005年
,本文編號:2263313
本文鏈接:http://www.wukwdryxk.cn/jianzhugongchenglunwen/2263313.html