還原響應型聚合物納米材料的制備及釋藥性能研究
發布時間：2018-08-03 15:37
【摘要】：聚合物納米材料可以通過調節聚合物的組成和聚集態的形成條件達到作為藥物載體的目的。當其作為藥物載體時,可以裝載藥物分子保護其在到達組織之前不被外界環境所破壞。載藥聚合物中所含雙硫鍵在腫瘤細胞中高谷胱甘肽(GSH)下能被還原成硫醇,實現藥物的定點釋放。本論文以生物相容性良好的聚乙二醇為原料,設計合成還原型HNTs-聚合物納米材料載藥體系。同時以雙鍵聚乙二醇為原料設計合成基于雙硫鍵的還原型核交聯膠束載藥體系。具體工作如下:⑴設計合成還原型HNTs-PAA-MPEG納米材料載藥體系采用原子轉移自由基聚合反應(ATRP),合成了兩親性嵌段聚合物MPEG-b-PtBA,酸解得到末端帶羧基的嵌段聚合物MPEG-PAA。HNTs表面經過共價修飾,引入雙硫鍵。末端帶氨基的納米管和末端帶羧基的聚合物MPEG-PAA經過溶液中的靜電結合得到含雙硫鍵的還原型HNTs-PAA-MPEG納米材料。通過核磁、凝膠滲透色譜對聚合物結構和分子量及分子量分布進行表征,證明成功合成了單分散性兩親聚合物。通過紅外、掃描電鏡和熱重分析表明,聚合物成功接枝到HNTs表面,并且聚合物所含羧基量越多,接枝到HNTs表面的聚合物量越多。通過包載和釋放阿霉素研究了HNTs-PAA-MPEG納米材料的載藥和藥物釋放行為。結果表明,在還原性GSH存在下,HNTs-PAA-MPEG納米材料能夠較快的釋放出藥物。因此,含雙硫鍵的HNTs-PAA-MPEG納米材料有望作為一種還原型藥物載體。⑵設計合成基于雙硫鍵的還原型核交聯膠束載藥體系通過自由基聚合,調控三個單體的加入量,形成側鏈以聚乙二醇甲基丙烯酸酯作為親水鏈段、乙酸-N-琥珀酰亞胺酯作為交聯鏈段、MA6-Chol作為疏水鏈段的不同比例不同分子量的聚合物(MPEG-NSA-Chol)。用核磁和凝膠滲透色譜對聚合物結構和分子量及分子量分布進行表征,證明成功合成了不同比例不同分子量的聚合物。隨后通過胱胺和乙酸-N-琥珀酰亞胺酯反應得到交聯的聚合物。同時,利用熒光光譜儀、動態光散射儀和透射電鏡對聚合物水溶液自組裝行為進行研究。結果表明:交聯后的聚合物膠束結構更穩定,尺寸更小(10-30 nm)。此外與聚合物載藥膠束相對比,交聯載藥膠束在還原性GSH存在下,能夠更快的釋放出藥物。因此,這種基于雙硫鍵的還原型核交聯膠束也很有潛質成為一種穩定的還原型藥物載體。
[Abstract]:Polymer nanomaterials can be used as drug carriers by adjusting the composition of polymers and the formation conditions of aggregation states. When it is used as a drug carrier, it can be loaded with drug molecules to protect it from environmental damage before reaching the tissue. The disulfide bond contained in the drug-loaded polymer can be reduced to mercaptan under glutathione (GSH) in tumor cells to realize the targeted release of the drug. In this paper, a novel drug delivery system of reduced HNTs- polymer nanomaterials was designed and synthesized from polyethylene glycol (PEG) with good biocompatibility. At the same time, double bond polyethylene glycol was used as raw material to design and synthesize reductive nuclear crosslinked micelle drug loading system based on disulfide bond. The main work is as follows: 1. The drug loading system of reduced HNTs-PAA-MPEG nanomaterials was designed and synthesized. The amphiphilic block polymer MPEG-b-PtBA was synthesized by atom transfer radical polymerization (ATRP),). The surface of block polymer MPEG-PAA.HNTs with carboxyl group at the end was covalently modified by acidolysis. The disulfide bond is introduced. The reduced HNTs-PAA-MPEG nanomaterials containing disulfide bonds were obtained by electrostatic binding of terminal amino nanotubes and carboxyl group polymer MPEG-PAA. The structure, molecular weight and molecular weight distribution of the polymer were characterized by NMR and gel permeation chromatography. It was proved that the monodisperse amphiphilic polymer was successfully synthesized. Infrared scanning electron microscopy and thermogravimetric analysis showed that the polymer was grafted onto the surface of HNTs and the more carboxyl group the polymer was grafted to the surface of HNTs the more the polymer was grafted to the surface of HNTs. Drug loading and drug release behavior of HNTs-PAA-MPEG nanomaterials were studied by encapsulating and releasing adriamycin. The results showed that HNTs-PAA-MPEG nanoparticles could release drugs rapidly in the presence of reductive GSH. Therefore, HNTs-PAA-MPEG nanomaterials with disulfide bonds are expected to be used as a reductive drug carrier .2 to design and synthesize reductive nuclear cross-linked micelle drug carrier system based on disulfide bond. The amount of three monomers can be regulated by free radical polymerization. The side chain was formed with poly (ethylene glycol) methacrylate as hydrophilic segment and acetic acid-N-succinimide as crosslinking segment MA6-Chol as hydrophobic polymer (MPEG-NSA-Chol). The structure, molecular weight and molecular weight distribution of polymers were characterized by NMR and gel permeation chromatography. The crosslinked polymer was obtained by the reaction of cysteamine with acetic acid-N-succinimide ester. At the same time, the self-assembly behavior of polymer aqueous solution was studied by fluorescence spectrometer, dynamic light scattering instrument and transmission electron microscope. The results show that the crosslinked polymer micelles have more stable structure and smaller size (10-30 nm). In addition, in the presence of reductive GSH, the cross-linked drug carrier micelles can release the drug more quickly than the polymer loaded micelles. Therefore, the reduced nuclear crosslinked micelles based on disulfide bond have the potential to become a stable drug carrier.
【學位授予單位】：河南師范大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TB383.1;TQ460.1
本文編號：2162193
[Abstract]:Polymer nanomaterials can be used as drug carriers by adjusting the composition of polymers and the formation conditions of aggregation states. When it is used as a drug carrier, it can be loaded with drug molecules to protect it from environmental damage before reaching the tissue. The disulfide bond contained in the drug-loaded polymer can be reduced to mercaptan under glutathione (GSH) in tumor cells to realize the targeted release of the drug. In this paper, a novel drug delivery system of reduced HNTs- polymer nanomaterials was designed and synthesized from polyethylene glycol (PEG) with good biocompatibility. At the same time, double bond polyethylene glycol was used as raw material to design and synthesize reductive nuclear crosslinked micelle drug loading system based on disulfide bond. The main work is as follows: 1. The drug loading system of reduced HNTs-PAA-MPEG nanomaterials was designed and synthesized. The amphiphilic block polymer MPEG-b-PtBA was synthesized by atom transfer radical polymerization (ATRP),). The surface of block polymer MPEG-PAA.HNTs with carboxyl group at the end was covalently modified by acidolysis. The disulfide bond is introduced. The reduced HNTs-PAA-MPEG nanomaterials containing disulfide bonds were obtained by electrostatic binding of terminal amino nanotubes and carboxyl group polymer MPEG-PAA. The structure, molecular weight and molecular weight distribution of the polymer were characterized by NMR and gel permeation chromatography. It was proved that the monodisperse amphiphilic polymer was successfully synthesized. Infrared scanning electron microscopy and thermogravimetric analysis showed that the polymer was grafted onto the surface of HNTs and the more carboxyl group the polymer was grafted to the surface of HNTs the more the polymer was grafted to the surface of HNTs. Drug loading and drug release behavior of HNTs-PAA-MPEG nanomaterials were studied by encapsulating and releasing adriamycin. The results showed that HNTs-PAA-MPEG nanoparticles could release drugs rapidly in the presence of reductive GSH. Therefore, HNTs-PAA-MPEG nanomaterials with disulfide bonds are expected to be used as a reductive drug carrier .2 to design and synthesize reductive nuclear cross-linked micelle drug carrier system based on disulfide bond. The amount of three monomers can be regulated by free radical polymerization. The side chain was formed with poly (ethylene glycol) methacrylate as hydrophilic segment and acetic acid-N-succinimide as crosslinking segment MA6-Chol as hydrophobic polymer (MPEG-NSA-Chol). The structure, molecular weight and molecular weight distribution of polymers were characterized by NMR and gel permeation chromatography. The crosslinked polymer was obtained by the reaction of cysteamine with acetic acid-N-succinimide ester. At the same time, the self-assembly behavior of polymer aqueous solution was studied by fluorescence spectrometer, dynamic light scattering instrument and transmission electron microscope. The results show that the crosslinked polymer micelles have more stable structure and smaller size (10-30 nm). In addition, in the presence of reductive GSH, the cross-linked drug carrier micelles can release the drug more quickly than the polymer loaded micelles. Therefore, the reduced nuclear crosslinked micelles based on disulfide bond have the potential to become a stable drug carrier.
【學位授予單位】：河南師范大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TB383.1;TQ460.1
【參考文獻】
相關期刊論文 前2條
1 章莉娟;陳銳毫;藍榮肇;楊友強;吳志民;李慶陽;郭新東;;ATRP法合成兩親性聚乙二醇-聚丙烯酸叔丁酯嵌段共聚物[J];高�；瘜W(xué)工程學報;2011年05期
2 趙海軍;汪朝陽;侯曉娜;李雄武;;膽固醇-聚(D,L-乳酸)的直接熔融聚合法制備與表征[J];化學試劑;2007年01期
，本文編號：2162193
本文鏈接：http://www.wukwdryxk.cn/kejilunwen/cailiaohuaxuelunwen/2162193.html
最近更新
教材專著
