發布時間：2018-08-05 15:35

【摘要】：減反射膜是一類用于減少光學元件表面的反射、增加工作波段內光透射率的光學薄膜。它廣泛應用于通訊器材、顯示器、激光器、太陽能電池及各類光學鏡片等光學元件當中。因此，研究減反射膜的設計和制備技術，對于生產實踐活動十分必要。 本文先采用SAN/PS共混溶液法制備了SAN增透膜，發現其增透效果不太理想，且薄膜耐水性較差。本文然后用經典乳液聚合法合成了粒徑窄分布的納米尺寸PMMA和PS乳液，，再通過共混乳液法制備了PMMA增透膜，發現此薄膜的增透效果明顯好于SAN增透膜。采用此法制備的PMMA增透膜不僅在可見光區具有增透性，而且在近紅外區也具有增透性，另外薄膜還具有一定的疏水性，此法的不足之處是步驟繁瑣。本文最后采用步驟更加簡便的單乳液法制備了PMMA增透膜，發現其增透效果與用共混乳液法制備的PMMA增透膜相比沒有大幅下降，且具有良好的耐超聲清洗性，可以嘗試在不同基底上采用此法制備增透膜。
[Abstract]:Antireflection film is a kind of optical film which is used to reduce the reflection on the surface of optical element and increase the optical transmittance in the working band. It is widely used in communication devices, displays, lasers, solar cells and optical lenses and other optical components. Therefore, it is necessary for production practice to study the design and preparation technology of antireflection film. In this paper, SAN antireflective films were prepared by SAN/PS blend solution method. It was found that the antireflective effect of SAN films was not ideal and the water resistance of the films was poor. In this paper, nano-sized PMMA and PS emulsions with narrow particle size distribution were synthesized by classical emulsion polymerization, and then PMMA antireflective films were prepared by blending emulsion method. It was found that the antireflective effect of PMMA films was better than that of SAN antireflective films. The PMMA antireflection film prepared by this method not only has antireflection in the visible region, but also has antireflection in the near infrared region. In addition, the film has some hydrophobicity. The disadvantage of this method is that the steps are tedious. In the end, the PMMA antireflective membrane was prepared by a simple and simple single emulsion method. It was found that the antireflection effect of the PMMA antireflective membrane was not significantly lower than that of the PMMA antireflective membrane prepared by blending emulsion method, and it had good ultrasonic cleaning resistance. This method can be used to prepare antireflective films on different substrates.
【學位授予單位】：東華大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TB383.2

【參考文獻】

相關期刊論文 前10條

1 鄭曄;陳奇;宋鸝;李會平;侯鳳珍;;溶膠-凝膠法制備硼硅酸鹽玻璃上減反射薄膜[J];玻璃與搪瓷;2009年02期

2 朱立巖;付秀華;;850nm高亮度半導體激光器腔面膜技術研究[J];長春理工大學學報(自然科學版);2007年01期

3 謝榮國,席珍強,馬向陽,袁俊,楊德仁;用化學腐蝕制備多孔硅太陽電池減反射膜的研究[J];材料科學與工程;2002年04期

4 賈士亮;張維佳;劉浩;張心強;郭衛;吳P;;納米硅薄膜太陽能電池的絨面結構研究[J];電子元件與材料;2009年03期

5 徐立恒,袁昌明,許潮江;PET與SAN/PAN復合膜界面的FTIR-ATR研究[J];光譜實驗室;2004年02期

6 李晨松,徐廷獻;無機薄膜的制備技術[J];硅酸鹽通報;2003年02期

7 王鶴,楊宏,于化叢,吳洪才,陳光德;單晶硅太陽電池納米減反射膜的研究[J];固體電子學研究與進展;2003年03期

8 劉會娟;陳寧;張清華;江波;;溶膠-凝膠法制備有機硅摻雜有機/無機復合疏水性減反射膜的研究[J];光學技術;2007年02期

9 楊振宇,朱大慶,陸冬生,張愛卿,趙茗,寧娜,劉擁軍1;納米孔隙薄膜中孔隙率與折射率關系的研究[J];光學學報;2003年11期

10 楊振宇;朱大慶;趙茗;金曦;孫濤;;聚合物納米孔隙增透膜制備工藝的研究[J];光學學報;2006年01期

本文編號：2166228