玉米淀粉修飾及其納米顆粒制備與表征
發布時間：2018-08-09 18:05
【摘要】：淀粉作為可生物降解和再生的高分子材料而備受關注，但原淀粉固有特性的不足限制了其應用，各種改性手段被用來對淀粉結構中活潑的多羥基官能團進行修飾，以增強淀粉材料的應用性。近年來，納米材料的研究方興未艾，淀粉納米材料與其它人工高分子材料相比具有一系列的優點，尤其在藥物載體和吸附劑等應用方面更表現出較強的優異性能。本文以淀粉為研究對象，從宏觀和微觀兩個層次來研究淀粉，宏觀上，，通過化學改性對淀粉進行琥珀�；男揎�，引入陰離子基團，改善淀粉的親水性能來獲得更多優良性質，其后以淀粉和改性淀粉為原料通過沉降法制備納米顆粒；從微觀上，調控淀粉分子的凝聚態結構，探索淀粉納米材料新的制備工藝，具體研究內容如下： 1.以淀粉為原料，琥珀酸酐為酯化劑，采用半干法工藝制備琥珀酸玉米淀粉酯，系統研究了影響淀粉酯化反應的不同因素，在單因素的基礎上，利用響應面分析法，采用多元二次回歸方程擬合反應因素與響應值之間的函數關系建立數學模型，并通過對響應值分析獲得最優工藝參數，方差分析表明模型具有較高的擬合度。此外，還通過紅外光譜(FT-IR)、X-射線衍射(XRD)、掃描電鏡(SEM)等表征手段對制備的典型樣品進行了結構分析。FT-IR分析表明，琥珀酰酯化反應將陰離子基團引入了淀粉分子結構中，XRD證實酯化反應主要發生在淀粉的無定形區，典型的晶體結構沒有被破壞，SEM顯示改性后的淀粉顆粒形貌保持完整。 2.選用DMSO為溶劑，淀粉充分溶解后，滴加到不良溶劑中利用沉淀技術制備水分散性納米粒子，實驗詳細考察了良溶劑與不良溶劑的選取及它們的比例，淀粉液的濃度及其他影響制備納米粒徑的因素，并對制備的納米顆粒在不同介質中分散性能進行了研究。通過動態光散射（DLS）、SEM、XRD等表征手段對制備的納米顆粒進行了結構分析。結果表明：通過改變實驗參數，可制備和調控尺寸為納米級的淀粉粒子，實驗發現，制備的納米顆粒在不加分散劑的情況下，可以在較長時間內保持穩定，化學結構沒有發生變化，晶體形態發生改變，顆粒形態呈球形。 3.以玉米淀粉為原料，采用水或堿水為溶劑，利用沉淀法制備淀粉納米顆粒，當?shù)矸酆旱稳氩涣既軇┮掖贾袝r(shí)，淀粉分子通過分子間或者分子內氫鍵相互作用重新裝配聚合，形成納米沉淀顆粒。實驗考察了淀粉乳濃度、體系的pH、不良溶劑的量、堿液濃度、尿素含量、表面活性劑的用量等因素對淀粉納米顆粒粒徑的影響，并采用DLS、XRD、SEM對制備的粒子性能結構進行了分析，分析結果顯示當不良溶劑中含有Tween80時，制備的淀粉納米顆粒尺寸會隨Tween80濃度增加而增大。 4.通過化學方法對淀粉進行改性，制備帶有正負電荷的陽離子淀粉和陰離子淀粉，然后通過沉淀法利用已合成的改性淀粉制備淀粉納米顆粒，研究了改性淀粉納米顆粒的制備和結構表征。陽離子淀粉納米粒子的δ-電位隨取代度的增加而增高。電位均為正值，表明粒子表面帶有正電荷，因此可用來負載或吸附負電荷分子，而陰離子淀粉制備的陰離子淀粉納米顆粒則帶有明顯的負電荷，F(xiàn)T-IR分析表明改性淀粉化學結構均發生了變化，可在相應的區域發現改性基團的特征峰，XRD證實改性淀粉納米粒子無晶體峰，SEM顯示制備的粒子出現了一定聚集，干粉狀態下顆粒聚集現象更明顯。
[Abstract]:Starch has attracted much attention as a biodegradable and regenerated polymer material, but the deficiency of the intrinsic properties of the original starch restricts its application. Various modification methods are used to modify the active polyhydroxy functional groups in the starch structure in order to enhance the application of starch materials. In recent years, the research of nanomaterials is in the ascendant and the starch nanometer is in the ascendant. The material has a series of advantages compared with other artificial polymer materials, especially in the application of drug carrier and adsorbent. The starch is used as the research object. The starch is studied from the macro and microcosmic two levels. On the macroscopic, the starch is modified by the modification of the succinyl group by chemical modification. The anionic groups can improve the hydrophilic properties of starch to obtain more excellent properties. Then, the nanoparticles are prepared by sedimentation method with starch and modified starch as raw materials. From the microcosmic, the condensed structure of starch molecules is regulated and the new preparation technology of starch nanomaterials is explored. The specific contents are as follows:
1. succinic acid corn starch ester was prepared by semi dry process with starch as raw material and succinic anhydride as the esterifying agent. The different factors affecting starch esterification were studied systematically. On the basis of single factor, the response surface analysis method was used to fit the function relationship between the inverse and response values, and the mathematical model was set up by the multiple regression equation. The optimal process parameters were obtained by the analysis of the response value. The variance analysis showed that the model had a higher fitting degree. In addition, the structure analysis of the typical samples was analyzed by infrared spectroscopy (FT-IR), X- ray diffraction (XRD), scanning electron microscope (SEM) and so on. The analysis showed that the succinyl esterification reacted the anion group to the anionic group. In the molecular structure of starch, XRD confirmed that esterification mainly occurred in the amorphous region of starch, and the typical crystal structure was not destroyed. SEM showed that the morphologies of the modified starch granules remained intact.
2. when DMSO is used as solvent, after the starch is dissolved, the water dispersible nanoparticles are prepared by precipitation in the bad solvent. The selection of good solvent and bad solvent and their proportion, the concentration of starch and other effects on the preparation of nanoparticles are investigated in detail, and the prepared nanoparticles are divided into different media. The dispersive properties were studied. The structure of the prepared nanoparticles was analyzed by means of dynamic light scattering (DLS), SEM and XRD. The results showed that the nanometer sized starch particles could be prepared and regulated by changing the experimental parameters. It was found that the prepared nanoparticles could be used for a long time without the dispersing agent. The crystal morphology was changed and the particle morphology was spherical.
3. starch nanoparticles were prepared by precipitation method using corn starch as the raw material, using water or alkaline water as the solvent. When starch gelatinization solution was dripped into the bad solvent ethanol, the starch molecules were reassembled and polymerized through intermolecular or intramolecular interaction of hydrogen bonds to form nanoscale particles. The concentration of starch milk, the pH of the system, and the bad effect were investigated. The effect of the amount of solvent, the concentration of alkaline solution, the content of urea, the dosage of the surfactant and other factors on the particle size of the starch nanoparticles was investigated. The properties of the prepared particles were analyzed by DLS, XRD and SEM. The results showed that the size of the prepared starch nanoparticles would increase with the increase of Tween80 concentration when Tween80 was contained in the bad solvent.
4. the cationic starch and anionic starch with positive and negative charges were prepared by chemical method, and then the prepared starch nanoparticles were prepared by precipitation method. The preparation and structure characterization of the modified starch nanoparticles were studied. The delta potential of the cationic starch nanoparticles was increased with the increase of the degree of substitution. The potential is positive, indicating that the surface of the particle has positive charge, so it can be used to load or adsorb negative charge molecules, and the anionic starch nanoparticles prepared by anionic starch have obvious negative charge. FT-IR analysis shows that the chemical structure of the modified starch has been changed, and the characteristics of the modified group can be found in the corresponding region. XRD showed that the modified starch nanoparticles had no crystal peak, SEM showed that the prepared starch nanoparticles had some aggregation, and the aggregation phenomenon was more obvious in dry powder state.
【學位授予單位】：吉林大學
【學位級別】：博士
【學位授予年份】：2015
【分類號】：TS236.9;TB383.1
本文編號：2174877
[Abstract]:Starch has attracted much attention as a biodegradable and regenerated polymer material, but the deficiency of the intrinsic properties of the original starch restricts its application. Various modification methods are used to modify the active polyhydroxy functional groups in the starch structure in order to enhance the application of starch materials. In recent years, the research of nanomaterials is in the ascendant and the starch nanometer is in the ascendant. The material has a series of advantages compared with other artificial polymer materials, especially in the application of drug carrier and adsorbent. The starch is used as the research object. The starch is studied from the macro and microcosmic two levels. On the macroscopic, the starch is modified by the modification of the succinyl group by chemical modification. The anionic groups can improve the hydrophilic properties of starch to obtain more excellent properties. Then, the nanoparticles are prepared by sedimentation method with starch and modified starch as raw materials. From the microcosmic, the condensed structure of starch molecules is regulated and the new preparation technology of starch nanomaterials is explored. The specific contents are as follows:
1. succinic acid corn starch ester was prepared by semi dry process with starch as raw material and succinic anhydride as the esterifying agent. The different factors affecting starch esterification were studied systematically. On the basis of single factor, the response surface analysis method was used to fit the function relationship between the inverse and response values, and the mathematical model was set up by the multiple regression equation. The optimal process parameters were obtained by the analysis of the response value. The variance analysis showed that the model had a higher fitting degree. In addition, the structure analysis of the typical samples was analyzed by infrared spectroscopy (FT-IR), X- ray diffraction (XRD), scanning electron microscope (SEM) and so on. The analysis showed that the succinyl esterification reacted the anion group to the anionic group. In the molecular structure of starch, XRD confirmed that esterification mainly occurred in the amorphous region of starch, and the typical crystal structure was not destroyed. SEM showed that the morphologies of the modified starch granules remained intact.
2. when DMSO is used as solvent, after the starch is dissolved, the water dispersible nanoparticles are prepared by precipitation in the bad solvent. The selection of good solvent and bad solvent and their proportion, the concentration of starch and other effects on the preparation of nanoparticles are investigated in detail, and the prepared nanoparticles are divided into different media. The dispersive properties were studied. The structure of the prepared nanoparticles was analyzed by means of dynamic light scattering (DLS), SEM and XRD. The results showed that the nanometer sized starch particles could be prepared and regulated by changing the experimental parameters. It was found that the prepared nanoparticles could be used for a long time without the dispersing agent. The crystal morphology was changed and the particle morphology was spherical.
3. starch nanoparticles were prepared by precipitation method using corn starch as the raw material, using water or alkaline water as the solvent. When starch gelatinization solution was dripped into the bad solvent ethanol, the starch molecules were reassembled and polymerized through intermolecular or intramolecular interaction of hydrogen bonds to form nanoscale particles. The concentration of starch milk, the pH of the system, and the bad effect were investigated. The effect of the amount of solvent, the concentration of alkaline solution, the content of urea, the dosage of the surfactant and other factors on the particle size of the starch nanoparticles was investigated. The properties of the prepared particles were analyzed by DLS, XRD and SEM. The results showed that the size of the prepared starch nanoparticles would increase with the increase of Tween80 concentration when Tween80 was contained in the bad solvent.
4. the cationic starch and anionic starch with positive and negative charges were prepared by chemical method, and then the prepared starch nanoparticles were prepared by precipitation method. The preparation and structure characterization of the modified starch nanoparticles were studied. The delta potential of the cationic starch nanoparticles was increased with the increase of the degree of substitution. The potential is positive, indicating that the surface of the particle has positive charge, so it can be used to load or adsorb negative charge molecules, and the anionic starch nanoparticles prepared by anionic starch have obvious negative charge. FT-IR analysis shows that the chemical structure of the modified starch has been changed, and the characteristics of the modified group can be found in the corresponding region. XRD showed that the modified starch nanoparticles had no crystal peak, SEM showed that the prepared starch nanoparticles had some aggregation, and the aggregation phenomenon was more obvious in dry powder state.
【學位授予單位】：吉林大學
【學位級別】：博士
【學位授予年份】：2015
【分類號】：TS236.9;TB383.1
【參考文獻】
相關期刊論文 前10條
1 吳修利;門海濤;董琰;周江;;羧酸酯淀粉取代度的檢測方法研究[J];安徽農業科學;2012年13期
2 姜英林;董文軒;;山楂種質資源的表型多樣性研究[J];北方果樹;2009年01期
3 李銳;高榮琨;劉作家;;乙酸奧曲肽的波譜解析[J];分析科學學報;2011年03期
4 楊敏;馬永全;于新;;納米技術在食品工業中的應用與研究進展[J];廣東農業科學;2010年04期
5 周巧萍;武進;張軍;何嘉松;孫志杰;張佐光;;高直鏈淀粉乙酸酯的均相合成及其靜電紡絲[J];高分子學報;2007年07期
6 宋師偉;王才;許冬梅;張文英;潘則林;王秀芬;;納米淀粉的制備與改性[J];高分子材料科學與工程;2009年08期
7 胡文兵;高分子的良溶劑和不良溶劑的兩種定義辯析[J];高分子通報;2000年02期
8 吳修利;薛冬樺;徐昆;杜希兵;張文德;宋春雷;王丕新;;淀粉-丙烯酰氧乙基三甲基氯化銨接枝共聚物的制備與表征[J];功能材料;2008年06期
9 劉維俊;范娉萍;周麗繪;黃永民;彭昌軍;劉洪來;;濁度法表征溫敏性微凝膠體積的相轉變行為[J];功能高分子學報;2007年04期
10 楊龍;左迎峰;張彥華;譚海彥;顧繼友;;反應溫度和時間對干法制備馬來酸酐酯化淀粉性能的影響[J];功能材料;2013年15期
相關博士學位論文 前5條
1 吳躍;抗高直鏈大米淀粉回生的物理修飾及其回生的檢測和表征[D];江南大學;2010年
2 任洪亮;光鑷測量膠體粒子間及界面與粒子間相互作用[D];中國科學技術大學;2008年
3 侯漢學;不同來源淀粉的結構與功能相關性及半干法陽離子化機理研究[D];山東農業大學;2007年
4 趙曉;有機染料聚集行為及其包覆研究[D];復旦大學;2009年
5 任麗麗;淀粉納米晶的改性及其在熱塑性淀粉復合材料中的應用[D];吉林大學;2012年
本文編號：2174877
本文鏈接：http://www.wukwdryxk.cn/kejilunwen/cailiaohuaxuelunwen/2174877.html
最近更新
教材專著
