發布時間：2018-02-21 08:25

  本文關鍵詞： IEC61850 Jini 智能變電站 互換性 IED　出處：《重慶大學》2014年碩士論文　論文類型：學位論文

【摘要】：變電站是電力系統重要組成部分，智能電網的發展給變電站技術水平提出了更高的要求。變電站經歷了傳統變電站、數字化變電站和智能變電站三個發展階段。目前智能變電站已經得到了廣泛應用，由于IEC61850的應用，智能變電站智能設備之間的互操作性已經能夠很好的實現。但是在實際變電站工程當中采用人工配置的方式效率較低，不同廠家生產設備模型之間的兼容性也存在缺陷。另外，智能設備的更換或增加可能需要對全站的智能設備重新配置�？紤]到目前變電站配置方式對技術人員的技術水平的依賴，智能變電站的維護和擴建將遇到更多的困難。針對以上問題，論文研究一種智能變電站智能設備的自動配置方法，即對智能設備的互換性實現方法展開研究，以期實現智能設備的“即插即用”。 首先，論文分析了IEC61850第二版更新的內容，在此基礎上研究了變電站和智能設備的建模方法。由于IEC61850給出的建模方法并沒有明確邏輯設備和邏輯節點是服務的接受方還是提供方，不利于模型的自動配置，本文對智能設備模型的邏輯設備和邏輯節點服務進行了定義，對資源對象的提供還是需求進行了區分。提出了智能變電站智能設備互換性過程。 其次，論文對國內外廣泛應用的“即插即用”技術進行分析，分別研究了PNP、UPnP和Jini的技術特點。通過分析發現，Jini跨平臺、面向?qū)ο蟆⒒�于服�?wù)、分布式的特點使得其能夠適應智能變電站環境。本文提出使用IEC61850和Jini技術相結合來實現智能設備的自動配置。 最后，論文建立了符合國內標準的變電站模型，將互換性的實現過程分為兩次模型的關聯，一是智能設備模型與智能變電站模型的關聯，確定了智能設備的功能間隔，為智能二次設備的關聯提供依據；二是智能設備模型之間的關聯，確定了設備之間的數據交互關系。針對某些智能設備在智能變電站只應用了部分功能，論文對服務的有效性進行了定義，防止將模型中描述了但是未啟用的部分服務加入到自動配置的過程。論文運用JDK和Jini搭建了互換性驗證平臺，仿真了智能設備的互換性實現過程，，按要求自動生成了智能設備的配置文件，驗證了本文提出的互換性實現方法的可行性和有效性。
[Abstract]:Substation is an important part of power system. The development of smart grid puts forward higher requirements for substation technical level. Digital substation and intelligent substation are three stages of development. At present, intelligent substation has been widely used, because of the application of IEC61850, The interoperability between intelligent devices in intelligent substations has been realized well. But in actual substation engineering, the manual configuration is inefficient, and the compatibility among the models of different manufacturers is also defective. The replacement or increase of smart devices may require the reconfiguration of smart devices throughout the station. Considering the dependence of the current substation configuration on the technical level of technicians, The maintenance and expansion of intelligent substation will meet more difficulties. In view of the above problems, this paper studies an automatic configuration method of intelligent equipment in intelligent substation, that is, the interchangeability realization method of intelligent equipment. In order to achieve the intelligent device "plug and play". First of all, the paper analyzes the content of the second edition of IEC61850, On this basis, the modeling method of substation and intelligent device is studied. Because the modeling method given by IEC61850 is not clear whether the logical device and the logical node are the recipient or provider of the service, it is not conducive to the automatic configuration of the model. In this paper, the logic device and logic node service of intelligent device model are defined, the resource object is provided or the requirement is distinguished, and the interchangeability process of intelligent equipment in intelligent substation is proposed. Secondly, the paper analyzes the "plug and play" technology which is widely used at home and abroad, and studies the technical characteristics of PNPP and Jini respectively. Through the analysis, it is found that Jini is cross-platform, object-oriented and service-based. The distributed system can adapt to the environment of intelligent substation. In this paper, the combination of IEC61850 and Jini technology is proposed to realize the automatic configuration of intelligent equipment. Finally, the paper establishes the substation model which conforms to the domestic standard, divides the interchangeability realization process into two models correlation, one is the intelligent device model and intelligent substation model correlation, determines the intelligent device function interval. It provides the basis for the association of intelligent secondary devices, the correlation between intelligent device models, and determines the data interaction between devices. In view of some intelligent devices, only some functions are applied in intelligent substations. In this paper, the validity of services is defined to prevent some services described but not enabled in the model from being added to the process of automatic configuration. An interchangeability verification platform is built by using JDK and Jini. The interchangeability realization process of intelligent equipment is simulated and the configuration file of intelligent equipment is automatically generated according to the requirements. The feasibility and effectiveness of the interchangeability realization method proposed in this paper are verified.
【學位授予單位】：重慶大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM63;TM76

【參考文獻】

相關期刊論文 前10條

1 孫一民;陳遠生;;母線保護裝置的IEC 61850信息模型[J];電力系統自動化;2007年02期

2 何衛;王永福;繆文貴;張祥文;楊玲;俞奇琦;;IEC 61850深層次互操作試驗方案[J];電力系統自動化;2007年06期

3 王麗華;張青山;張馬龍;候志光;史京浩;周紹文;張玉松;趙中華;江濤;;IEC 61850建模工具的設計與實現[J];電力系統自動化;2008年04期

4 王俊生;吳林平;王振曦;張少波;;高壓直流控制保護系統IEC 61850建模[J];電力系統自動化;2009年01期

5 賀春;張冉;;IEC 61850國際互操作試驗經驗總結[J];電力系統自動化;2012年02期

6 徐寧;朱永利;邸劍;于成洋;謝慶;;基于IEC61850的變電站自動化對象建模[J];電力自動化設備;2006年03期

7 王勇;何光宇;梅生偉;;基于IEC61850的數字化變電站互操作試驗[J];電力自動化設備;2009年02期

8 楊桂松;牛志剛;張浩;;IEC61850網關中典型抽象通信服務接口對象模型與MMS之間的映射方法[J];電網技術;2007年S2期

9 李晶;段斌;周江龍;劉莉莉;;基于GMRP的變電站發布/訂閱通信模型設計[J];電網技術;2008年16期

10 陳愛林;葉鋒;耿明志;張海東;徐歆;任浩;;一種IEC 61850通用數據類數據庫信息模型的建模方法[J];電力系統自動化;2013年13期

本文編號：1521478