a国产,中文字幕久久波多野结衣AV,欧美粗大猛烈老熟妇,女人av天堂

當前位置:主頁 > 科技論文 > 機械論文 >

基于創新理論的機械產品改進設計

發布時間:2018-07-31 06:47
【摘要】:隨著經濟技術的發展,企業面臨著更為嚴峻的市場競爭。國內的很多企業缺乏自主創新能力,很多產品基本上是根據經驗來確定參數進行設計,或者是模仿測繪國外產品,產品穩定性和可靠性較差,且易產生知識產權糾紛。研究表明,科學發現、科學儀器和科學方法是成功創新的根本途徑,而科學方法的核心是創新方法,只有讓設計人員掌握了創新方法,才能推動企業創新,實現產業技術轉型。因此,本文著力研究基于創新理論的產品設計方法,并嘗試把它們應用到工程機械產品改進設計當中。 設計作為一項不斷發展的社會活動,,具有經驗的積累性和實踐的創新性。根據不同的設計內容和目的,可遵循一定的設計程序。設計程序與方法是一組完整的概念,在一定的設計程序中使用一定的設計方法才能順利完成該程序預定的目的。本文闡述了一些通用的產品設計方法,詳細介紹了TRIZ創新技法的理論體系,在此基礎上提出了適合工程機械產品設計的方法,使兩者得到有機的結合。 文中把上述過程應用到壓路機部件的改進設計過程。首先,應用了技術進化理論對壓路機的軸承損壞和激振室漏油問題進行分析和解決,并取得了明顯的效果;其次,應用基于矛盾矩陣的Pro/Techniques5.0軟件工具給出解決駕駛員作業時不適的措施,提出了改變技術參數的原理,降低了減振器的剛度,改變了駕駛員不適現象;最后對壓路機做了簡化的三維模型,對剛度和上下車質量比改變前后進行仿真分析,得出剛度取較低下限的可行性。
[Abstract]:With the development of economy and technology, enterprises are facing more severe market competition. Many domestic enterprises lack the ability of independent innovation, many products are basically based on experience to determine the parameters of design, or imitating the mapping of foreign products, product stability and reliability is poor, and prone to intellectual property disputes. The research shows that scientific instruments and scientific methods are the basic ways of successful innovation, and the core of scientific methods is innovation methods. Only when designers master the innovative methods, can they promote enterprise innovation and realize the transformation of industrial technology. Therefore, this paper studies the product design methods based on innovation theory, and tries to apply them to the improved design of construction machinery products. Design as a continuous development of social activities, with the accumulation of experience and practical innovation. According to different design content and purpose, can follow certain design procedure. The design program and method are a set of complete concepts. Only by using a certain design method in a certain design program can the intended purpose of the program be successfully completed. In this paper, some general product design methods are described, and the theoretical system of TRIZ innovative techniques is introduced in detail. On the basis of this, the method suitable for the design of construction machinery products is put forward, so that the two can be combined organically. In this paper, the above process is applied to the improved design process of roller components. Firstly, the technology evolution theory is applied to analyze and solve the problems of bearing damage and vibration chamber leakage of roller, and the obvious results are obtained. The Pro/Techniques5.0 software tool based on contradiction matrix is used to solve the discomfort of driver, and the principle of changing technical parameters is put forward, which reduces the stiffness of shock absorber and changes the phenomenon of driver discomfort. Finally, the simplified three-dimensional model of the roller is made, and the simulation analysis is carried out before and after the change of the stiffness and the mass ratio of loading and unloading, and the feasibility of taking the lower limit of the stiffness is obtained.
【學位授予單位】:長安大學
【學位級別】:碩士
【學位授予年份】:2012
【分類號】:TH122

【參考文獻】

相關期刊論文 前10條

1 黃旗明,潘云鶴;產品設計中技術創新的思維過程模型研究[J];工程設計;2000年02期

2 陳宏彬,劉軍;國外振動壓路機發展趨勢[J];中外公路;2005年01期

3 孫慶;顏曉惠;;區域推廣應用TRIZ理論效果評價指標體系研究[J];哈爾濱理工大學學報;2010年05期

4 毛權,肖人彬,周濟;CBR中基于實例特征的相似實例檢索模型研究[J];計算機研究與發展;1997年04期

5 楊偉;邱聲;;人機工程學在振動壓路機設計中的應用研究[J];機械管理開發;2011年01期

6 俞杰,耿衛東,潘云鶴;面向產品創新設計的CAD方法綜述[J];計算機輔助設計與圖形學學報;1999年02期

7 丁俊武;韓玉啟;鄭稱德;;基于TRIZ的產品需求獲取研究[J];計算機集成制造系統;2006年05期

8 鄒慧君,王立群;機械設計中機構選型初探[J];機械設計與研究;1989年04期

9 鄒慧君,汪利,王石剛,郭為忠;機械產品概念設計及其方法綜述[J];機械設計與研究;1998年02期

10 張勝;;振動壓路機減振性能影響因素及評價指標[J];交通世界(建養.機械);2010年10期

相關博士學位論文 前1條

1 丁俊武;基于創新問題解決理論的產品設計方法及其應用研究[D];南京理工大學;2005年

相關碩士學位論文 前5條

1 劉華;基于TRIZ理論的產品概念設計方法及應用[D];南京理工大學;2005年

2 劉浩亮;振動壓路機減振性能研究[D];長安大學;2005年

3 袁媛;TRIZ理論在煙霧機產品造型創新設計中的應用[D];南京林業大學;2008年

4 趙存有;基于TRIZ理論的電牽引采煤機概念設計[D];哈爾濱工程大學;2008年

5 沈曉龍;級配碎石材料特性和設備選配[D];長安大學;2010年



本文編號:2154770

資料下載
論文發表

本文鏈接:http://www.wukwdryxk.cn/kejilunwen/jixiegongcheng/2154770.html


Copyright(c)文論論文網All Rights Reserved | 網站地圖 |

版權申明:資料由用戶b5c98***提供,本站僅收錄摘要或目錄,作者需要刪除請E-mail郵箱bigeng88@qq.com
夜夜高潮夜夜爽高清视频| 日日躁夜夜躁狠狠躁超碰97| 亚洲一区二区三区波多野结衣| 国产精品VA无码一区二区| 亚洲午夜无码久久久久小说| 波多野结衣高潮av在线播放| 久久99久久99精品中文字幕| 钟山县| 大肉大捧一进一出好爽| 人妻网| 综合影院| 胡桃色图| 日本不卡一区| 后入在线| 男人天堂av| 亚洲精品少妇| 狠狠综合久久av一区二区三区| 人人妻人人澡人人爽| 成人性生活| 西西www4444大胆视频| 国产成人精品亚洲av无人区一区 | 欧美一区二区AV人片在线观看| 武安市| 手机看片av无码免费| 夜间影院| 99久久精品免费看国产四区| 伦理片在线| 亚洲国产精品一区二区尤物区| 成人精品| 办公室挺进少妇杨丽| av天堂国产| 成人免费网站www网站高清| 天天干人妻| 久久成人| 乱女乱妇熟女熟妇综合网站| 郸城县| 无码8090精品久久一区| 999综合网| 久热综合在线亚洲精品| 亚洲欧美日韩v在线观看不卡| 四虎永久在线精品免费网站|