新型少齒差行星減速器箱體結構有限元分析
發布時間:2018-10-29 09:01
【摘要】:介紹了肖南平先生提出并獲得發明專利的一種新型少齒差行星減速器的結構組成,利用ANSYS Workbench軟件建立此減速器箱體的有限元模型。對箱體各實際受載情況進行靜力學分析,得出箱體所受最大應力和變形量的變化曲線,為箱體結構后續結構改進和輕量化設計提供相關分析數據。對箱體進行有限元模態分析,得到箱體固有頻率及相應振型,將其與減速器的轉頻和嚙合頻率進行對比分析,可確定減速器是否會發生共振現象。對相應振型的分析為減速器結構的優化設計及振動問題提供理論依據。
[Abstract]:This paper introduces the structure and composition of a new type of planetary reducer with less tooth difference, which is put forward by Mr. Xiao Nanping and obtained the patent of invention. The finite element model of the reducer box is established by using ANSYS Workbench software. Based on the static analysis of the actual loading conditions of the box, the variation curves of the maximum stress and deformation of the box are obtained, which provide the relevant analysis data for the subsequent structural improvement and lightweight design of the box structure. The finite element modal analysis of the box body is carried out, and the natural frequency and the corresponding vibration mode of the box body are obtained. By comparing it with the rotating frequency and meshing frequency of the reducer, it can be determined whether resonance will occur in the reducer. The analysis of the corresponding vibration modes provides a theoretical basis for the optimum design of the reducer structure and the vibration problem.
【作者單位】: 鄭州機械研究所;中國科學院過程工程研究所;
【分類號】:TE933.1
本文編號:2297241
[Abstract]:This paper introduces the structure and composition of a new type of planetary reducer with less tooth difference, which is put forward by Mr. Xiao Nanping and obtained the patent of invention. The finite element model of the reducer box is established by using ANSYS Workbench software. Based on the static analysis of the actual loading conditions of the box, the variation curves of the maximum stress and deformation of the box are obtained, which provide the relevant analysis data for the subsequent structural improvement and lightweight design of the box structure. The finite element modal analysis of the box body is carried out, and the natural frequency and the corresponding vibration mode of the box body are obtained. By comparing it with the rotating frequency and meshing frequency of the reducer, it can be determined whether resonance will occur in the reducer. The analysis of the corresponding vibration modes provides a theoretical basis for the optimum design of the reducer structure and the vibration problem.
【作者單位】: 鄭州機械研究所;中國科學院過程工程研究所;
【分類號】:TE933.1
【相似文獻】
相關期刊論文 前2條
1 何毅斌;陳定方;徐勝;楊建國;;一種新型行星減速器的虛擬設計[J];石油礦場機械;2008年09期
2 ;[J];;年期
相關碩士學位論文 前1條
1 曹樂;潛油螺桿泵采油系統并聯行星減速器的研究[D];沈陽工業大學;2015年
,本文編號:2297241
本文鏈接:http://www.wukwdryxk.cn/kejilunwen/shiyounenyuanlunwen/2297241.html
教材專著