發布時間：2018-03-24 01:02

  本文選題：開放式　切入點：運動學變換　出處：《山東大學》2017年碩士論文

【摘要】：運動控制技術是發展現代自動化工業以及智能機械制造的關鍵技術。通用的多軸機構運動控制技術在工業機器人和數控機床領域內的應用要比在專用機器領域中的應用更為復雜。多軸機構運動控制技術在如今的工業現場已被廣泛應用,其中在打磨、噴涂、抓取與擺放、碼垛、裝配等工業領域中的作用尤為突出。研究設計出一套開放式通用的多軸機構運動控制系統不僅響應了國家科技創新的政策,對實現"中國制造2025"也是意義重大,設計出適合多種機器人以及數字控制機床的通用控制系統對現代自動化工業發展,提升整個國家綜合實力,加快工業現代化、智能化進程具有深遠意義。本文對開放式多軸機構運動控制系統進行了深入的研究,設計了基于CODESYS 3.5運動控制軟件開發平臺的開放式多軸控制系統。論文的主要研究內容與成果如下:(1)研究分析空間矩陣對多軸機構工具中心或末端的位置、工具姿態以及機構平移、旋轉等運動的表示方法,運用運動學D-H表示法對多軸機構的正、逆運動學進行詳細的計算分析,并分別推導了擺頭+轉臺形式五軸數控機床的坐標系變換以及SCARA機器人的運動學變換。然后,對SCARA機器人的運動范圍進行了分析。(2)研究了多軸機構的三維模型仿真技術�；�于第三方構圖設計平臺SolidWorks 2010,設計出了不同類型多軸機構的三維仿真模型,并將其集成在人機交互操作界面中,使得可視化操作界面更加形象。(3)介紹了多軸控制系統中的G代碼編程方法,并且使用OPC技術完成了上位機可視化界面與機構運動控制系統之間的實時通信,實現了三維仿真模型與機構本體同步工作。(4)以工業PC及德國3S公司CODESYS 3.5運動控制軟件作為系統的控制核心,全面構建了多合一的控制系統。搭建了硬件實驗平臺,采用總線式通信技術,使得系統更加開放,可擴展性更強。(5)基于VS2010軟件中的WPF平臺開發了多合一的上位機可視化操作界面,在系統中預先配置了三種機構型號(三軸、五軸機床和SCARA機器人),用戶可以根據實際需要,對機構模型進行選擇,并且對所選機構模型的結構參數進行簡易配置。在上位機可視化操作界面中實現了通信連接、程序管理、數據顯示、報警復位、手動操作、自動操作、在線編程等功能。
[Abstract]:Motion control technology is the key technology in the development of modern automation industry and intelligent machinery manufacture. The general motion control technology of multi-axis mechanism is applied in the field of industrial robot and NC machine tool more than in the field of special machine. Multi-axis mechanism motion control technology has been widely used in today's industrial field. Especially in the fields of grinding, spraying, grabbing and placing, palletizing, assembling and so on, the research and design of a set of open and universal motion control system of multi-axis mechanism not only responds to the national policy of scientific and technological innovation. It is also of great significance to realize "made in China 2025". The design of a general control system suitable for many kinds of robots and digital control machine tools will promote the development of modern automation industry, enhance the comprehensive strength of the whole country, and speed up the modernization of industry. The intelligent process is of profound significance. In this paper, the motion control system of open multi-axis mechanism is deeply studied. An open multi-axis control system based on CODESYS 3.5 motion control software development platform is designed. The main contents and results of this paper are as follows: 1) the position of the tool center or end of the multi-axis mechanism based on the spatial matrix is studied and analyzed. The kinematics D-H representation method is used to calculate and analyze the forward and inverse kinematics of the multi-axis mechanism. The coordinate system transformation and the kinematics transformation of the SCARA robot are derived respectively. In this paper, the motion range of SCARA robot is analyzed. (2) the 3D model simulation technology of multi-axis mechanism is studied. Based on the third party composition design platform SolidWorks 2010, the 3D simulation model of different types of multi-axis mechanism is designed. The method of G code programming in multiaxial control system is introduced by integrating it into the man-machine interactive operation interface, which makes the visual operation interface more visual. And the real-time communication between the visual interface of the host computer and the mechanism motion control system is completed by using OPC technology. This paper realizes the synchronization of 3D simulation model and mechanism. 4) taking industrial PC and CODESYS 3.5 motion control software of Germany 3s company as the control core of the system, a multi-in-one control system is built in an all-round way. The hardware experiment platform is built. Using bus communication technology, make the system more open and extensible. Based on the WPF platform in VS2010 software, the visual operation interface of host computer is developed. In the system, three kinds of mechanism models (three-axis, three-axis, three-axis) are pre-configured. With five-axis machine tool and SCARA robot, the user can select the mechanism model according to the actual needs, and configure the structure parameters of the selected mechanism model easily. The communication connection and program management are realized in the visual operation interface of the upper computer. Data display, alarm reset, manual operation, automatic operation, online programming and other functions.
【學位授予單位】：山東大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TP273

【參考文獻】

相關期刊論文 前10條

1 羅亮;王瀚博;劉知貴;范玉德;;PLCopen多軸圓弧運動控制功能塊的實現[J];自動化儀表;2017年02期

2 劉琴;;編程語言在計算機應用軟件開發中的選擇[J];電腦編程技巧與維護;2017年01期

3 ;倍福推出新型嵌入式控制器[J];自動化應用;2016年12期

4 晏越;;“德國工業4.0”與“中國制造2025”綜述[J];科技風;2016年16期

5 歐陽勁松;劉丹;汪爍;丁露;;德國工業4.0參考架構模型與我國智能制造技術體系的思考[J];自動化博覽;2016年03期

6 李瑞霞;李粉霞;楊潔明;周晉陽;;基于D-H法的串聯機械手臂工作空間分析[J];機床與液壓;2015年21期

7 彭瑜;;支撐智能制造的PLCopen規范和技術[J];自動化儀表;2015年10期

8 沈烈初;;關于“中國制造2025”與“德國工業4.0”的思考[J];表面工程與再制造;2015年04期

9 ;國務院關于印發《中國制造2025》的通知[J];寧波節能;2015年03期

10 李紅軍;姜慶昌;;SCARA型機器人運動學分析與仿真[J];現代制造技術與裝備;2015年01期

相關博士學位論文 前2條

1 王翰;基于PLCopen規范的運動控制系統研究與實現[D];華中科技大學;2014年

2 郭天太;基于VR的虛擬測試技術及其應用基礎研究[D];浙江大學;2005年

相關碩士學位論文 前5條

1 王偉;基于CODESYS的多軸機器人控制系統的研究[D];山東大學;2015年

2 王興飛;開放型運動控制卡與HMI的通訊研究[D];華南理工大學;2014年

3 王慧娟;智能機器人物理仿真技術的研究與實現[D];電子科技大學;2014年

4 熊青春;四自由度教學機器人的研制[D];合肥工業大學;2006年

5 牟秋鋒;基于OPC的生產線監控系統的研究與應用[D];東南大學;2005年

，

本文編號：1655979