汽輪機滑壓運行初壓智能優化方法的研究
發布時間:2018-07-20 11:54
【摘要】:近年來,社會電力用電結構已發生了較大的變化,電網負荷晝夜峰谷差越來越大。大量超臨界汽輪機組被要求深度調峰,機組利用小時數逐年降低,低負荷運行時間普遍增加,熱經濟性大大降低。同時,隨著我國經濟、能源和環保形勢的發展,火電機組節能降耗已成為企業生存運行的客觀需要。因此,如何提高機組在低負荷階段的運行經濟性成為一個亟待解決的問題。要確保汽輪機變工況運行時仍能保持最佳狀態,就必須對汽輪機的運行初壓進行優化,以降低機組的熱耗率。群智能優化技術是人們受生物進化或自然現象啟發而提出的新方法,能很好的處理復雜系統的建模和優化問題。針對傳統方法很難描述超臨界汽輪機的復雜非線性、多工況等熱力特性模型,不易實現機組初壓優化的不足,本文對人工智能領域中混合蛙跳算法(shuffled frog leaping algorithm,SFLA)、最小二乘支持向量機(least squares support vector machine,LSSVM)及基于聚類的多模型建模技術進行重點研究,并將它們應用于機組初壓優化,以實現機組的經濟運行。主要研究內容如下:首先,針對典型混合蛙跳算法尋優能力不足的問題,提出了一種改進SFLA算法(mixed search SFLA,MS-SFLA)。通過引入了混沌反學習策略、非線性自適應慣性權值以及一個新的局部擾動策略以提高算法優化能力。通過13個基準測試函數的仿真測試,驗證了改進的混合蛙跳算法具有較好的優化性能;谠撍惴▽ψ钚《酥С窒蛄繖C回歸算法超參數進行優化,數值仿真實驗驗證了該算法建模時的有效性。然后,研究了模糊C均值聚類算法在數據聚類劃分中的應用。為了改善模糊C均值聚類對噪聲和孤立點的魯棒性,提出采用基于RBF核函數的模糊C均值算法。同時,為了解決諸如聚類精度受數據分布影響、對初始聚類中心敏感、易陷入局部最優以及難以確定最優聚類數的不足,提出一種新的基于G-K算法的雙層聚類算法,熱耗率多模型建模仿真試驗驗證了該算法的可行性。另外,針對單模型難以精確描述具有復雜非線性特性汽輪機熱耗率的問題,提出了一種基于雙層聚類算法和LSSVM融合的熱耗率多模型建模方法,并利用MS-SFLA算法進行模型參數的選擇。隨后,將其應用到某600MW超臨界汽輪機熱耗率的建模,仿真實驗證明該多模型建模方法能高精度的預測機組的熱耗率,具有良好的泛化能力。最后,在建立好的熱耗率多模型的基礎上,利用MS-SFLA算法在給定負荷的可行運行初壓范圍內,以熱耗率最低為優化目標來確定汽輪機變工況運行時的最優運行初壓。將得到的最優運行初壓作為汽輪機自動運行時主蒸汽壓力的設定值,能達到機組優化運行的目的,并據此給出優化后的滑壓運行曲線,該曲線具有更為實際的指導意義。
[Abstract]:In recent years, great changes have taken place in the structure of social electric power consumption, and the difference between day and night peak and valley of power grid load is increasing. A large number of supercritical steam turbine units are required to deep peak shaving, the number of operating hours of the units is reduced year by year, the running time of low load is generally increased, and the thermal economy is greatly reduced. At the same time, with the development of economy, energy and environmental protection in our country, energy saving and consumption reduction of thermal power units has become the objective need for enterprises to survive and run. Therefore, how to improve the operating economy of units at low load stage becomes an urgent problem to be solved. In order to ensure that the steam turbine can maintain the best condition in the off-condition operation, it is necessary to optimize the operation initial pressure of the turbine in order to reduce the heat consumption rate of the unit. Swarm intelligence optimization is a new method inspired by biological evolution or natural phenomena. It can deal with the modeling and optimization problems of complex systems well. The traditional method is difficult to describe the complex nonlinear, multi-condition thermodynamic characteristic model of supercritical steam turbine, and it is not easy to realize the initial pressure optimization of the unit. In this paper, the hybrid leapfrog algorithm (shuffled frog leaping algorithm), least square support vector machine (least squares support vector machine) and multi-model modeling technology based on clustering in artificial intelligence field are studied, and they are applied to initial pressure optimization. In order to achieve the economic operation of the unit. The main contents are as follows: firstly, an improved SFLA algorithm, (mixed search SFLA-MS-SFLA, is proposed to solve the problem of poor optimization ability of the typical hybrid leapfrog algorithm. Chaotic inverse learning strategy, nonlinear adaptive inertia weight and a new local perturbation strategy are introduced to improve the optimization ability of the algorithm. The simulation results of 13 benchmark functions show that the improved hybrid leapfrog algorithm has better performance. Based on this algorithm, the super-parameters of the least squares support vector machine regression algorithm are optimized, and the effectiveness of the algorithm is verified by numerical simulation. Then, the application of fuzzy C-means clustering algorithm in data clustering is studied. In order to improve the robustness of fuzzy C-means clustering to noise and outliers, a fuzzy C-means algorithm based on RBF kernel function is proposed. At the same time, in order to solve the problem that clustering accuracy is affected by data distribution, sensitive to the initial clustering center, easy to fall into local optimum and difficult to determine the optimal clustering number, a new two-layer clustering algorithm based on G-K algorithm is proposed. The feasibility of the algorithm is verified by heat consumption rate multi-model modeling and simulation. In addition, aiming at the problem that it is difficult to accurately describe the heat consumption rate of steam turbine with complex nonlinear characteristics by single model, a multi-model modeling method of heat consumption rate based on two-layer clustering algorithm and LSSVM fusion is proposed. MS-SFLA algorithm is used to select the model parameters. Then, it is applied to the modeling of heat consumption rate of a 600MW supercritical steam turbine. The simulation results show that the multi-model modeling method can predict the heat consumption rate of the unit with high accuracy and has a good generalization ability. Finally, on the basis of establishing a good multi-model of heat consumption rate, MS-SFLA algorithm is used to determine the optimal initial operating pressure of steam turbine in off-condition operation with the minimum heat consumption rate as the optimization objective within the feasible initial operating pressure range of a given load. The optimal operation initial pressure is regarded as the set value of the main steam pressure during the automatic operation of the steam turbine, which can achieve the purpose of the optimal operation of the unit, and based on this, the sliding pressure operation curve after the optimization is given, which has more practical guiding significance.
【學位授予單位】:燕山大學
【學位級別】:博士
【學位授予年份】:2016
【分類號】:TP18;TM621
本文編號:2133432
[Abstract]:In recent years, great changes have taken place in the structure of social electric power consumption, and the difference between day and night peak and valley of power grid load is increasing. A large number of supercritical steam turbine units are required to deep peak shaving, the number of operating hours of the units is reduced year by year, the running time of low load is generally increased, and the thermal economy is greatly reduced. At the same time, with the development of economy, energy and environmental protection in our country, energy saving and consumption reduction of thermal power units has become the objective need for enterprises to survive and run. Therefore, how to improve the operating economy of units at low load stage becomes an urgent problem to be solved. In order to ensure that the steam turbine can maintain the best condition in the off-condition operation, it is necessary to optimize the operation initial pressure of the turbine in order to reduce the heat consumption rate of the unit. Swarm intelligence optimization is a new method inspired by biological evolution or natural phenomena. It can deal with the modeling and optimization problems of complex systems well. The traditional method is difficult to describe the complex nonlinear, multi-condition thermodynamic characteristic model of supercritical steam turbine, and it is not easy to realize the initial pressure optimization of the unit. In this paper, the hybrid leapfrog algorithm (shuffled frog leaping algorithm), least square support vector machine (least squares support vector machine) and multi-model modeling technology based on clustering in artificial intelligence field are studied, and they are applied to initial pressure optimization. In order to achieve the economic operation of the unit. The main contents are as follows: firstly, an improved SFLA algorithm, (mixed search SFLA-MS-SFLA, is proposed to solve the problem of poor optimization ability of the typical hybrid leapfrog algorithm. Chaotic inverse learning strategy, nonlinear adaptive inertia weight and a new local perturbation strategy are introduced to improve the optimization ability of the algorithm. The simulation results of 13 benchmark functions show that the improved hybrid leapfrog algorithm has better performance. Based on this algorithm, the super-parameters of the least squares support vector machine regression algorithm are optimized, and the effectiveness of the algorithm is verified by numerical simulation. Then, the application of fuzzy C-means clustering algorithm in data clustering is studied. In order to improve the robustness of fuzzy C-means clustering to noise and outliers, a fuzzy C-means algorithm based on RBF kernel function is proposed. At the same time, in order to solve the problem that clustering accuracy is affected by data distribution, sensitive to the initial clustering center, easy to fall into local optimum and difficult to determine the optimal clustering number, a new two-layer clustering algorithm based on G-K algorithm is proposed. The feasibility of the algorithm is verified by heat consumption rate multi-model modeling and simulation. In addition, aiming at the problem that it is difficult to accurately describe the heat consumption rate of steam turbine with complex nonlinear characteristics by single model, a multi-model modeling method of heat consumption rate based on two-layer clustering algorithm and LSSVM fusion is proposed. MS-SFLA algorithm is used to select the model parameters. Then, it is applied to the modeling of heat consumption rate of a 600MW supercritical steam turbine. The simulation results show that the multi-model modeling method can predict the heat consumption rate of the unit with high accuracy and has a good generalization ability. Finally, on the basis of establishing a good multi-model of heat consumption rate, MS-SFLA algorithm is used to determine the optimal initial operating pressure of steam turbine in off-condition operation with the minimum heat consumption rate as the optimization objective within the feasible initial operating pressure range of a given load. The optimal operation initial pressure is regarded as the set value of the main steam pressure during the automatic operation of the steam turbine, which can achieve the purpose of the optimal operation of the unit, and based on this, the sliding pressure operation curve after the optimization is given, which has more practical guiding significance.
【學位授予單位】:燕山大學
【學位級別】:博士
【學位授予年份】:2016
【分類號】:TP18;TM621
【相似文獻】
相關期刊論文 前6條
1 楊海婭;谷俊杰;;調峰運行時汽輪機組蒸汽初壓的優化確定[J];應用能源技術;2010年07期
2 李慧君;劉學敏;;基于新型變工況算法的汽輪機初壓優化研究[J];熱力發電;2013年06期
3 盛德仁,任浩仁,陳堅紅,李蔚,朱偉杭;汽輪機調峰運行時蒸汽初壓的優化確定[J];動力工程;2000年05期
4 劉偉;葉亞蘭;司風琪;徐治皋;;基于BP神經網絡和SA-BBO算法的汽輪機組最優運行初壓的確定[J];熱能動力工程;2013年01期
5 邵峰;;汽輪機組最佳經濟運行方式的確定[J];熱力發電;2013年08期
6 王世勛;龔源榮;周金順;儲鏘勇;;600MW超臨界機組滑壓優化運行技術研究[J];汽輪機技術;2011年02期
相關博士學位論文 前1條
1 劉超;汽輪機滑壓運行初壓智能優化方法的研究[D];燕山大學;2016年
相關碩士學位論文 前3條
1 陳林霄;汽輪機組運行初壓在線尋優方法應用研究[D];華北電力大學;2014年
2 段曉龍;火電廠汽輪機初壓優化智能算法的研究與應用[D];燕山大學;2014年
3 楊瀟;基于磷蝦群算法的汽輪機初壓優化研究[D];燕山大學;2015年
,本文編號:2133432
本文鏈接:http://www.wukwdryxk.cn/shoufeilunwen/xxkjbs/2133432.html
最近更新
教材專著