發布時間：2018-07-26 10:40

【摘要】：近年來,隨著我國物流產業的發展,物流倉儲機器人市場需求也日益增強,物流倉儲機器人管理系統已經逐漸變得更自動化和智能化。物流倉儲機器人管理系統中,用機器人來代替人進行工作,不但可以節約人力成本和減少搬運不當對人造成的傷害,而且可以提高倉儲系統的工作效率。因此,本文設計了基于STM32的物流倉儲移動機器人系統,模擬實現了物流倉儲中物料入庫信息管理的功能。本文具體完成以下的主要工作:首先,根據物流倉儲移動機器人系統設計的要求,給出了具體實現方案,并規劃出系統的工作流程。其次,結合系統設計的具體要求,設計并搭建了物流倉儲移動機器人的硬件結構,硬件結構由主控芯片、電源模塊、RFID讀卡模塊、紅外傳感器避障模塊、XBee無線通信模塊、舵機模塊、QTI巡線模塊等組成。再次,根據硬件模塊化設計以及系統設計的要求,對物流倉儲移動機器人系統進行軟件設計,軟件設計分為下位機軟件設計與上位機軟件設計。然后,對物流倉儲移動機器人的路徑規劃算法也做出了研究,論文主要對A*算法和螢火蟲算法做出了研究并改進,改進后算法的有效性通過實驗仿真得到了驗證。最后,搭建了物流倉儲移動機器人的實驗平臺,包括場地、物料、貨架等實物的設計,完成了機器人的無線通信以及物料掃描功能的測試,同時成功實現了物流倉儲移動機器人系統物料入庫管理的功能。
[Abstract]:In recent years, with the development of logistics industry in our country, the market demand of logistics warehousing robot is increasing day by day, and the management system of logistics storage robot has become more automatic and intelligent. In the logistics warehouse robot management system, the robot can not only save the labor cost and reduce the harm caused by improper handling, but also improve the working efficiency of the storage system. Therefore, a mobile robot system of logistics storage based on STM32 is designed in this paper, and the function of information management of material storage in logistics storage is realized by simulation. The main work of this paper is as follows: firstly, according to the requirements of the design of the logistics storage mobile robot system, the implementation scheme is given, and the working flow of the system is planned. Secondly, according to the specific requirements of the system design, the hardware structure of the logistics storage mobile robot is designed and built. The hardware structure is composed of the main control chip, the power supply module and the RFID card reading module, the infrared sensor obstacle avoidance module and the XBee wireless communication module. Steering gear module QTI inspection module and other components. Thirdly, according to the requirements of hardware modularization design and system design, the software design of logistics warehousing mobile robot system is carried out. The software design is divided into lower computer software design and upper computer software design. Then, the path planning algorithm of logistics storage mobile robot is also studied. The paper mainly researches and improves the A* algorithm and the firefly algorithm. The effectiveness of the improved algorithm is verified by experimental simulation. Finally, the experiment platform of the logistics storage mobile robot is built, including the design of the physical objects such as the site, the material, the shelf, the wireless communication of the robot and the testing of the material scanning function. At the same time, the function of material storage management in logistics storage mobile robot system is successfully realized.
【學位授予單位】：湖南工業大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TP242

【參考文獻】

相關期刊論文 前10條

1 孟明輝;周傳德;陳禮彬;馮淼;苗純正;;工業機器人的研發及應用綜述[J];上海交通大學學報;2016年S1期

2 潘翔;唐春暉;張仁杰;;基于混合蛙跳算法的移動機器人路徑規劃[J];電子科技;2015年11期

3 劉康;段瀅瀅;張恒才;;基于路網拓?fù)鋵哟涡员磉_(dá)的駕車路徑規劃方法[J];地球信息科學學報;2015年09期

4 黃震;羅中良;黃時慰;;一種帶時間窗車輛路徑問題的混合蟻群算法[J];中山大學學報(自然科學版);2015年01期

5 周靜;付緒昌;;基于新的粒子群算法的虛擬角色路徑規劃仿真系統[J];計算機應用;2014年09期

6 李志剛;;智能機器人吸塵器:迎來蓬勃發展[J];電器;2014年09期

7 王井利;張春哲;;自適應卡爾曼濾波在地鐵監測中的應用[J];沈陽建筑大學學報(自然科學版);2014年02期

8 李江;王義偉;魏超;張鵬;;卡爾曼濾波理論在電力系統中的應用綜述[J];電力系統保護與控制;2014年06期

9 于海璁;陸鋒;;一種基于遺傳算法的多模式多標準路徑規劃方法[J];測繪學報;2014年01期

10 譚民;王碩;;機器人技術研究進展[J];自動化學報;2013年07期

相關碩士學位論文 前1條

1 王珊珊;輪式移動機器人控制系統設計[D];南京理工大學;2013年

，

本文編號：2145743