發布時間：2018-06-19 03:44

  本文選題：聚氨酯彈性體 + 夾層復合結構　； 參考：《復合材料學報》2017年03期

【摘要】：針對聚氨酯彈性體的隔板夾層結構,闡述了多種不同的等效參數計算方法,并對等效參數進行計算。首先討論和計算了不考慮結構剪切變形時的整體結構等效參數計算方法,將整體夾層結構等效為正交各向異性薄板,給出了考慮夾芯抗彎剛度的整體剛度系數表達式。其次,在考慮夾層結構夾芯存在剪切變形的情況下,推導了由分隔隔板和聚氨酯彈性體組成的夾芯胞元的等效彈性常數;最后,使用基于應變能密度等效分析的有限元方法對夾芯胞元等效彈性常數進行計算,并與理論分析結果進行對比,二者誤差在10%以內。
[Abstract]:According to the partition sandwich structure of polyurethane elastomer, several kinds of calculation methods of equivalent parameters are expounded, and the equivalent parameters are calculated. In this paper, the calculation method of the equivalent parameters of the whole structure without considering the shear deformation of the structure is discussed and calculated, and the integral sandwich structure is equivalent to the orthotropic thin plate, and the expression of the integral stiffness coefficient considering the bending stiffness of the sandwich core is given. Secondly, considering the shear deformation of sandwich core, the equivalent elastic constant of sandwich cell composed of separator and polyurethane elastomer is derived. The finite element method based on the strain energy density equivalent analysis is used to calculate the equivalent elastic constant of the sandwich cell, and the results are compared with the theoretical analysis results. The error between the two methods is less than 10%.
【作者單位】： 哈爾濱工程大學航天與建筑工程學院;沈陽發動機設計研究所強度設計室;
【基金】：國家自然科學基金(51409056) 黑龍江省自然科學基金(E2015047) 哈爾濱工程大學中央高�；�本科研業務費專項基金項目(HEU20160202)
【分類號】：TB332

【參考文獻】

相關期刊論文 前3條

1 孫士平;賴余東;;蜂窩體胞尺寸對夾芯板性能的影響研究[J];航空材料學報;2011年02期

2 王紅霞;王德禹;李U，

本文編號：2038269