發布時間：2018-07-28 21:14

【摘要】：可展曲面是Gauss曲率等于零的直紋面。它具有很多重要性質,例如它可以沒有拉伸和撕裂地展開到平面上；它是單參數平面族的包絡等等。這些性質使可展曲面在曲面造型中具有非常重要的應用價值。比如在實體外形的設計中,若實體外表面是可展曲面,則可以在平面上進行設計；在計算機圖形學的紋理映射中,一張平面圖片可以沒有形變地貼到可展曲面上等等。所以,根據工程實際要求如何構造所需的可展曲面,已成為當前想要解決的一個重要問題。 因此,本文主要針對基于已知的曲線、曲面幾何條件如何構造可展曲面及相關問題,進行了如下幾方面的深入研究和探討： (1)完善了過曲面曲線構造其可展切曲面的一般性理論和方法,得出了可展切曲面的表達形式,對可展切曲面進行了分類,通過建立兩曲面間的映射關系,實現了它們間整體與局部的映射分析,較準確地把握曲面上幾何要素的變形情況,并通過實例對理論和方法進行了驗證。 (2)提出了構造回轉曲面的可展切曲面及它們間映射分析的理論與方法,建立了回轉曲面可展切柱面和可展切錐面的數學模型以及曲面間的映射關系,根據回轉曲面及其可展切曲面間微分長度比的理論分析,推出了映射中極值映射曲線和等距映射曲線的微分方程,通過整體和局部的變形分析,可以準確地掌握回轉曲面與其可展切曲面間映射中的變形情況。 (3)以曲面片的可展切曲面研究為基礎,得出了過曲面、曲線幾何要素構造可展曲面的理論和方法,包括過一條曲線構造與另一曲面相切的可展曲面和過兩曲線構造的可展曲面,得出了可展曲面的解析表達形式。 (4)作為上述理論和方法的應用,給出了可展曲面構造與分析在曲面映射、不可展曲面近似展開和構件表面可展化設計等方面的應用舉例。
[Abstract]:A developable surface is a straight surface with Gauss curvature equal to zero. It has many important properties, such as it can expand to the plane without stretching and tearing, it is the envelope of the single parameter plane family and so on. These properties make developable surfaces have very important application value in surface modeling. For example, in the design of solid shape, if the external surface of the solid is an developable surface, it can be designed on the plane; in the texture mapping of computer graphics, a plane image can be attached to the developable surface without deformation, and so on. Therefore, how to construct the developable surface according to the practical engineering requirements has become an important problem to be solved. Therefore, this paper focuses on how to construct developable surfaces based on known geometric conditions of curves and surfaces and related problems. The following aspects are studied and discussed: (1) the general theory and method of constructing the developable tangent surface of hyperbolic curve are improved, the expression of developable tangent surface is obtained, and the developable tangent surface is classified. By establishing the mapping relationship between the two surfaces, the global and local mapping analysis between them is realized, and the deformation of geometric elements on the surface is accurately grasped. The theory and method are verified by examples. (2) the theory and method of constructing developable tangent surfaces and mapping analysis between them are presented. The mathematical models of developable tangent cylinder and developable tangent cone of rotary surface and the mapping relationship between them are established. The differential length ratio between the rotational surface and its developable tangent surface is analyzed theoretically. The differential equations of extreme mapping curve and equidistant mapping curve in mapping are derived, and the global and local deformation analysis are carried out. It is possible to accurately grasp the deformation of the mapping between the rotational surface and its developable tangent surface. (3) based on the research of the developable tangent surface of the surface slice, the theory and method of constructing the developable surface with the geometric elements of the curve are obtained. The analytic expression of developable surface is obtained by constructing the developable surface which is tangent to another curve and the developable surface constructed by two curves. (4) as the application of the above theory and method, The applications of construction and analysis of developable surfaces in surface mapping, approximate expansion of non-developable surfaces and developable design of component surfaces are given.
【學位授予單位】：東北大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH122

【參考文獻】

相關期刊論文 前10條

1 曹沅,華宣積;二次參數曲面的可展分類[J];復旦學報(自然科學版);1997年02期

2 毛昕,樊文萱;不可展曲面近似展開精度的研究[J];工程圖學學報;1988年01期

3 毛昕,侯悅;不可展回轉曲面近似展開的精度分析[J];工程圖學學報;1998年04期

4 毛昕,侯悅;回轉曲面近似展開的數學模型[J];工程圖學學報;1999年04期

5 李亮;鄧建松;;近似可展曲面的構造及應用[J];高等學校計算數學學報;2006年04期

6 梁偉文,賓鴻贊;自由曲面的透視紋理映射研究[J];光學精密工程;2002年04期

7 王弘,王昌凌;基于物理模型的參數化曲面展開[J];華中理工大學學報;2000年03期

8 范波,吳慧中;多面體表面紋理映射方法的研究[J];計算機研究與發展;1999年04期

9 王弘,王昌凌;基于能量模型的曲面展開通用算法[J];計算機輔助設計與圖形學學報;2001年06期

10 陳動人,王國瑾;可展Bézier參數曲面[J];計算機輔助設計與圖形學學報;2003年05期

，

本文編號：2151596