發布時間：2018-07-30 08:25

【摘要】：針對液壓動力系統中定速定量泵液壓源能耗高、效率低，定速變量泵系統結構復雜、抗污染能力差、調速范圍窄，以及異步變頻電機驅動液壓系統慣性大、響應慢、低速性能差、電機功率因數低等缺點，本文提出了基于永磁同步伺服電機驅動定量泵的液壓動力源結構形式，將永磁電機調速精度高、調速范圍寬、動態特性好、功率因數高等優點與齒輪泵抗油液污染能力強、工作可靠性高、結構緊湊、價格低廉等優點相結合。在充分研究伺服電機電壓、電流、轉速、轉矩，定量泵的流量、壓力、排量、泄漏量，以及油液的溫度、粘度、彈性模量等系統參數的基礎上，，提出了定量泵輸出流量、壓力的軟測量方法；針對不同負載類型實現了伺服驅動液壓動力系統的流量控制、壓力控制、恒功率控制；提出了不同工況下液壓動力系統效率狀態圖示分析方法，為液壓動力系統高效節能運行、負載匹配、負載自適應控制提供了新思路、新方法。本文完成的主要研究與創新工作： （1）根據永磁同步伺服電機的工作原理，以齒輪泵為例，利用解析法建立了伺服電機驅動定量泵液壓動力系統數學模型和比例溢流閥加載模型；從系統層面對液壓動力系統的運行參數、耦合機理、約束條件進行分析，為液壓動力系統的控制模式、流量-壓力間接測量、負載效率匹配特性研究奠定理論基礎。 （2）根據液壓動力系統流量、壓力、轉速、轉矩電流、泄漏系數、轉動慣量等參數的耦合機理，建立了流量、壓力的軟測量模型，通過容易測量的轉速、轉矩電流等相關參數實現了流量、壓力的間接測量，根據油液的粘溫粘壓特性對流量測量模型進行補償，提高流量測量模型精度。實驗和仿真表明：軟測量模型具有足夠的精度和動態響應速度，保證流量控制精確性、快速性和穩定性指標。 （3）在分析了流量開環控制、流量閉環PID控制、前饋補償PID控制和模糊參數PID控制的基礎上，提出了流量的模型與條件PID補償控制，將模型開環控制響應及時、容易穩定的特點與PID控制能夠消除系統穩態誤差的特點相結合，并且可通過PID控制中條件閾值的設定有效減小系統超調量和調整時間，實現了流量控制的快速性、準確性和穩定性要求。 （4）根據工程中廣泛使用的恒壓變量泵技術性能指標，提出了伺服驅動液壓源的壓力負反饋控制和直接轉矩壓力開環控制，實驗表明：壓力負反饋控制能夠穩定系統壓力，消除系統誤差；直接轉矩壓力開環控制響應速度快，穩定性好；而帶有粘滯阻尼補償?shù)闹苯愚D(zhuǎn)矩壓力開環控制既保持了原有轉矩壓力控制的快速性、準確性的同時，還具有足夠的精度，能夠滿足負載對恒壓變流量的需求。 （5）對恒功率變量泵控制特性進行分析，建立了永磁電機驅動定量泵恒功率控制模型，提出了電機的弱磁升速控制，仿真與實驗均表明：液壓源恒功率、電機弱磁升速控制時能夠充分利用電機的功率，并且能夠自動適應負載流量、壓力恒功率變化需求，實現液壓動力源輸出高壓小流量和低壓大流量控制。 （6）對感應異步電機和永磁同步電機驅動液壓動力源的能耗、調速特性、功率匹配、響應特性等主要技術性能進行了對比分析；通過工況等效變換研究了負載效率匹配特性，建立了基于RGB的效率二維彩色表示法和基于疊加法的效率二維灰度表示法，為負載匹配選型、效率工況區間劃分提供了直觀的圖示化新方法。
[Abstract]:In view of the disadvantages of high energy consumption, low efficiency, low efficiency, low efficiency, low pollution resistance, narrow speed regulating range, high inertia of the hydraulic system driven by asynchronous frequency conversion motor, slow response, poor low speed performance and low power factor of the motor, this paper proposes a permanent magnet synchronous servo motor drive in this paper. The hydraulic power source structure of the dynamic quantitative pump has the advantages of high speed regulating precision, wide speed range, good dynamic characteristic, high power factor, high power factor, high reliability of gear pump, high working reliability, compact structure, low price and so on. It is fully studied the voltage, current, speed, torque and quantitative pump of servo motor. On the basis of the system parameters such as flow, pressure, displacement, leakage, temperature, viscosity and elastic modulus of the oil, a soft measurement method for the output flow and pressure of the pump is put forward, and the flow control, pressure control and constant power control of the servo driven hydraulic power system are realized for different load types, and the hydraulic pressure is put forward in different working conditions. The graphical analysis method of efficiency state of power system provides new ideas and new methods for high efficiency and energy saving operation of hydraulic power system, load matching and load adaptive control. The main research and innovation work completed in this paper is:
(1) according to the working principle of the permanent magnet synchronous servo motor and taking the gear pump as an example, the mathematical model of the hydraulic power system of the servo motor driven quantitative pump and the proportional overflow valve loading model are established by analytic method, and the operation parameters, coupling mechanism and constraint conditions of the hydraulic power system are analyzed from the system layer, and the control of the hydraulic power system is made. It lays a theoretical foundation for the research of indirect measurement of flow pressure and load efficiency matching characteristics.
(2) according to the coupling mechanism of the parameters of the hydraulic power system, such as flow, pressure, speed, torque current, leakage coefficient, and moment of inertia, the soft measurement model of flow and pressure is established. The flow and pressure are measured by the parameters of speed, torque current and other related parameters easily measured, and the flow measurement model is based on the viscosity and pressure characteristics of the oil. The accuracy of the flow measurement model is improved. The experiment and simulation show that the soft sensing model has enough precision and dynamic response speed to ensure the accuracy, speediness and stability of the flow control.
(3) on the basis of analyzing the flow open loop control, the flow closed loop PID control, the feedforward compensation PID control and the fuzzy parameter PID control, the flow model and the conditional PID compensation control are proposed. The characteristics of the model open loop control response in time and the stability are combined with the characteristics of the PID control that can eliminate the steady-state error of the system, and can be passed through PID. The setting of the conditional threshold in the control effectively reduces the overshoot and adjustment time of the system, and realizes the rapidity, accuracy and stability requirements of the flow control.
(4) according to the technical performance index of constant pressure variable pump widely used in the project, the pressure negative feedback control and direct torque pressure open loop control of the servo driven hydraulic source are put forward. The experiment shows that the pressure negative feedback control can stabilize the system pressure and eliminate the system error; the direct torque pressure open loop control has fast response speed and good stability. The direct torque pressure open loop control with viscous damping compensation not only keeps the speed of the original torque pressure control, but also has enough accuracy to meet the demand of the load to constant pressure variable flow.
(5) the constant power variable pump control characteristic is analyzed, the permanent magnet motor driving quantitative pump constant power control model is established, and the weak magnetic lifting speed control of the motor is put forward. The simulation and experiment show that the power of the hydraulic source is constant and the motor weak magnetic lifting speed control can fully utilize the power of the motor, and it can automatically adapt to the load flow and pressure constant. Power change needs to control the output of hydraulic power source with high pressure and low flow rate and large flow rate.
(6) the energy consumption, speed regulation, power matching and response characteristics of induction induction motor He Yongci synchronous motor are compared and analyzed. The matching characteristics of load efficiency are studied by the equivalent transformation of working conditions, and two dimensional color representation method based on RGB and two dimensional efficiency based on superposition method are established. Grayscale representation provides an intuitive graphical method for load matching selection and efficiency division.
【學位授予單位】：西安建筑科技大學
【學位級別】：博士
【學位授予年份】：2013
【分類號】：TH137;TM383.4

【參考文獻】

相關期刊論文 前10條

1 祝海林,鄒景,高瀾慶,張文明;流量非接觸測量方法[J];北京科技大學學報;1997年05期

2 張友根;;變頻調速技術在注塑機上的應用[J];變頻器世界;2005年06期

3 高殿榮;劉金慧;溫茂森;;軸向柱塞液壓電機泵內部流場的分析[J];燕山大學學報;2010年06期

4 陳海泉,谷學華,孫玉清;液壓介質的仿真[J];大連海事大學學報;2002年02期

5 鄭建明;趙升噸;魏樹國;;開關磁阻電機直接驅動容積控制技術在液壓機上的應用[J];鍛壓裝備與制造技術;2008年01期

6 王益群;劉濤;姜萬錄;唐勇;;軟測量技術在動態流量測量中的應用[J];中國工程機械學報;2004年02期

7 權龍,李鳳蘭;注塑機電液控制系統節能原理及最新技術[J];機床與液壓;1999年05期

8 姚春東,沈桂英,許亞芬;進口鉆機上的液壓伺服恒功率控制系統[J];機床與液壓;2001年04期

9 彭天好,孫繼亮,汲方林;變轉速液壓容積調速系統的控制結構[J];機床與液壓;2005年06期

10 張俊俊;;組合機床液壓系統恒功率微機控制系統研究[J];機床與液壓;2007年02期

相關博士學位論文 前4條

1 馮斌;液壓油有效體積彈性模量及測量裝置的研究[D];浙江大學;2011年

2 張紅娟;變轉速泵控差動缸及低能耗注塑機技術研究[D];太原理工大學;2011年

3 胡東明;液壓電梯變轉速閉式電液系統速度控制特性研究[D];浙江大學;2009年

4 安驥;非插入式液壓系統管路壓力與流量測量技術研究[D];大連海事大學;2010年

本文編號：2154413