發布時間：2017-12-28 22:13

  本文關鍵詞：高精度傾角儀檢定校準裝置　出處：《上海工程技術大學》2016年碩士論文　論文類型：學位論文

  更多相關文章： 傾角儀 校準裝置 角度編碼器 LabVIEW 圖像識別

【摘要】：傾角儀是用于測量一平面(或圓柱面)相對于水平面的傾斜角及平面(或圓柱面)之間夾角的儀器,包括采用電子傾角傳感器的電子數顯傾角儀和機械傾角測量機構的光學傾斜儀。本文研究和開發了一種基于高精度角度編碼器的校準裝置。首先分析國內外傾角儀校準的研究現狀,介紹了常用的角度基準器具,并分析了現有的校準裝置。根據傾角儀測量原理和校準項目的要求,并借鑒現有的校準的方法及裝置,確定本校準裝置的方案。設計手動型校準裝置,根據對所需校準基準器具應滿足的特點,選定角度編碼器為本裝置校準基準器具,并根據校準項目的要求,選定角度編碼器的型號,通過角度編碼器與傾角儀的數據比較,實現校準。根據傾角儀的尺寸、外形和角度編碼器的安裝、尺寸、外形等,設計制造了手動型裝置,裝置包括機械系統與角度編碼器及顯示器。根據方案設計確定機械系統組成,機械系統包括:裝夾待校準傾角儀的夾具部件、對角度編碼器進行安裝的部件、對角度編碼器進行調節的傳動部件及調速部件和對裝置進行調平的底座部件,然后分別對各部件進行分析設計,確定各部件的結構。應用SolidWorks軟件設計機械機構裝配圖,并繪制零件工程圖,進行零件加工,然后對零部件進行裝配,完成手動型校準裝置的開發。根據裝置使用人員的要求,在手動型裝置的基礎上,進行改進型裝置的設計,使用電機為驅動部件,驅動機械部件的運行,應用AT89S52單片機作為下位機,應用LabVIEW設計上位機軟件,控制電機。應用Lab VIEW的相關模塊讀取并記錄角度編碼器與有輸出接口且開放的傾角儀,對沒有輸出接口或有輸出接口但不開放的傾角儀用攝像頭采集圖像,并識別出圖像中的數據,并記錄數據,完成改進型裝置的開發。最后對手動型裝置進行校準并取得了校準證書,并應用手動型裝置對傾角儀進行現場校準試驗,并記錄與分析實驗數據,得到校準結果。
[Abstract]:The inclinometer is used for measuring a plane (or cylindrical) relative to the horizontal plane and the tilt angle (or cylindrical) angle between the instrument, including the use of optical electronic tiltmeter tilt sensor electronic digital inclinometer and mechanical angle measuring mechanism. In this paper, a calibration device based on high precision angle encoder is studied and developed. First, the current research status of the calibration of the inclinometer at home and abroad is analyzed, and the common angle benchmarks are introduced, and the existing calibration devices are analyzed. According to the measuring principle of the inclinometer and the requirements of the calibration project, and drawing on the existing calibration methods and devices, the scheme of the calibration device is determined. Design manual calibration device, according to the characteristics of the required calibration datum instruments of the selected angle encoder for the calibration device and calibration datum instruments, according to the requirements of the project, the selected angle encoder model through angle coder and inclinometer data, realize the calibration. According to the size, shape and angle of the inclinometer, the installation, size and shape of the encoder are designed, and a manual device is designed. The device includes mechanical system, angle encoder and display. According to the design scheme to determine the mechanical system, the mechanical system includes: fixture parts, clamp for calibration of the inclinometer component installed on the drive components are angle encoder and speed components on the regulation of angle encoder and the base member of the leveling device, then each part to analyze and design, determine the structure of the part. We use SolidWorks software to design mechanical mechanism assembly drawing, draw parts engineering drawings, make parts processing, and then assemble parts to complete the development of manual calibration device. According to the requirements of the users of the device, the design of the improved device is carried out on the basis of the manual device. The motor is used as the driving part to drive the operation of the mechanical parts. The AT89S52 microcontroller is used as the slave computer, and the upper computer software is designed by LabVIEW to control the motor. Application of Lab module VIEW read and record with the inclination angle encoder output interface and open, no output interface or output interface but not with the inclinator open the camera to capture images and identify the image data, and recording data, complete the development of improved device. Finally, the calibration device is calibrated and the calibration certificate is obtained. The manual calibration is used to calibrate the inclinometer, and the experimental data are recorded and analyzed to get the calibration results.
【學位授予單位】：上海工程技術大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TH712

【相似文獻】

相關期刊論文 前10條

1 徐桂芳;一種檢測物體傾斜角度的傾角儀[J];大學物理實驗;1999年02期

2 何天寶;張永水;鄭惠琴;;傾角儀測量結構變形的方法及其精度分析[J];交通科技;2008年06期

3 徐根德;一種檢測物體傾斜角度的傾角儀[J];物理實驗;1995年05期

4 王娟;徐淑靜;徐愛東;;微機械熱對流傾角儀溫度補償技術研究[J];微納電子技術;2006年08期

5 高峰;馬樹林;;傾角儀在橋梁安全監測中的應用研究[J];華南地震;2013年03期

6 李勇;閆維明;陳彥江;;基于傾角測試的橋梁變形實時監測研究[J];振動與沖擊;2013年05期

7 侯興民,楊學山,黃僑;利用傾角儀測量橋梁的撓度[J];橋梁建設;2004年02期

8 蘇維嘉;張澎;;基于嵌入式實時操作系統的動態數顯傾角儀[J];工業控制計算機;2009年07期

9 樊銳;史磊;;數字傾角儀的非線性補償及抗干擾技術[J];儀表技術與傳感器;2013年05期

10 徐金鋒;;有理三次樣條函數在傾角儀中的技術應用[J];甘肅科技;2012年01期

相關重要報紙文章 前1條

1 黑龍江 黃智理 劉興宇;用量角器制作簡易傾角儀[N];電子報;2001年

相關碩士學位論文 前3條

1 范中明;高精度傾角儀檢定校準裝置[D];上海工程技術大學;2016年

2 李洪旭;傾角儀振動測試分析及誤差修正的研究[D];華中科技大學;2013年

3 毓添婧;基于MEMS傾角儀的建筑結構地震過程轉角監測[D];大連理工大學;2013年

，

本文編號：1347624