發布時間：2018-05-30 20:02

  本文選題：移動機器人 + 目標識別��； 參考：《哈爾濱工業大學》2017年碩士論文

【摘要】：隨著機器視覺和機器人控制技術的快速發展,越來越多的機器人應用到航天、深海以及核電站等極限作業環境中。當核電站受到外界因素的影響導致核泄漏時,將對人類的生存環境帶來災難性的影響,而進行救災作業也會對救援人員的健康造成傷害,因此,具備移動作業能力的機器人成為核電站救災作業的急需裝備。利用機器人打開防火門的門鎖是核電站救災作業中十分重要,也是難度較大的一項任務。本文通過對開鎖作業過程以及視覺定位誤差的分析,研制了一款具備較高柔順性能的開鎖末端執行器,并對其中的一些關鍵技術進行了深入研究。通過對開鎖作業的任務需求進行深入分析,明確了末端執行器需實現的功能,基于鑰匙插入鎖孔過程的相關約束分析,建立了趨向鑰匙與鎖孔配合目標的行為運動學模型,進而給出了參數化的定位抓持捕獲區域的計算方法,通過對不同的鑰匙插入工況進行分析,得到了相應的容差范圍,確定抓持過程中末端執行器所需要的柔順參數,為末端執行器的設計提供了理論依據。為實現核電站條件下視覺引導的自動開鎖任務,開展了機器視覺有限分辨率條件下對目標圖像的識別方法研究,應用HOG-SVM方法實現了鎖孔以及門把手等目標的識別,并在此基礎上提出一種融合目標物理特征的識別方法,提高了對目標鎖孔識別的準確率。在鎖孔的識別返回的目標圖像基礎上進行動態跟蹤研究,針對傳統的Meanshift跟蹤方法的不足,提出了一種融合最大穩定極值區域特征的目標跟蹤方法,降低了跟蹤均值誤差,對動態跟蹤獲得的最終目標鎖孔圖像進行了定位及方向的判別,并與激光跟蹤儀測量得到的位置數據進行比較,對視覺定位誤差值進行了評估�；陂_鎖過程柔順參數和視覺定位誤差,提出了具備較高柔順性能的欠驅動自適應開鎖末端執行器總體設計方案,并通過仿真軟件對重要部件進行了拓?fù)鋬?yōu)化。在對開鎖作業仿真分析后,搭建了開鎖試驗平臺,在力學測試評估基礎上,提出了自動開鎖策略,并對開鎖末端執行器進行了綜合測試,結果表明,開鎖末端執行器能夠在允許容差范圍內,完成開鎖任務。
[Abstract]:With the rapid development of machine vision and robot control technology, more and more robots are applied to space, deep sea and nuclear power plant. When a nuclear power plant is affected by external factors, it will cause a catastrophic impact on the human living environment, and disaster relief operations will also cause harm to the health of rescue workers. The robot with mobile operation ability becomes the urgent equipment of the nuclear power station disaster relief operation. It is very important and difficult to use robot to open the door lock of fire proof door in the disaster relief operation of nuclear power station. Based on the analysis of the process of unlocking and the error of visual positioning, a kind of terminal actuator with high compliance performance is developed in this paper, and some key technologies are deeply studied. Through the thorough analysis of the task requirement of the unlocking operation, the function of the terminal actuator is clarified. Based on the analysis of the relevant constraints in the keyhole insertion process, the behavioral kinematics model of the orientation key and the keyhole matching target is established. Then a parameterized calculation method of the capture area is given. By analyzing the different key insertion conditions, the corresponding tolerance range is obtained, and the compliance parameters of the terminal actuator in the grasping process are determined. It provides a theoretical basis for the design of the end actuator. In order to realize the task of automatically unlocking under the condition of nuclear power plant vision, the recognition method of target image under the condition of finite resolution of machine vision is studied, and the recognition of keyhole and doorknob is realized by using HOG-SVM method. On the basis of this, a method of fusion target physical feature recognition is proposed, which improves the accuracy of target keyhole recognition. Based on the target image from the keyhole recognition and return, the dynamic tracking method is studied. Aiming at the shortcomings of the traditional Meanshift tracking method, a target tracking method combining the maximum stable region feature is proposed, which reduces the mean error of tracking. Finally, the location and orientation of the final target keyhole image obtained by dynamic tracking are analyzed and compared with the position data measured by laser tracker, and the visual positioning error is evaluated. Based on the compliance parameters of the unlocking process and the visual positioning error, the overall design scheme of the underactuated adaptive unlocking end actuator with high compliance performance is proposed, and the topology optimization of the important components is carried out through the simulation software. After the simulation analysis of the unlocking operation, the open lock test platform is built. Based on the mechanical test and evaluation, the automatic unlock strategy is put forward, and the comprehensive test of the open locking end actuator is carried out. The results show that, The unlocking end actuator can complete the unlocking task within the allowable tolerance.
【學位授予單位】：哈爾濱工業大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TP242

【參考文獻】

相關期刊論文 前10條

1 Shi Zhenyun;Yuan Peijiang;Wang Qishen;Chen Dongdong;Wang Tianmiao;;New design of a compact aero-robotic drilling end effector: An experimental analysis[J];Chinese Journal of Aeronautics;2016年04期

2 黃文明;呂智;;裝配機器人視覺定位系統的研究[J];機電技術;2015年02期

3 苗姣姣;徐望明;;HSV空間和形態學處理相結合的車牌定位方法[J];電視技術;2015年05期

4 Tian Wei;Zhou Weixue;Zhou Wei;Liao Wenhe;Zeng Yuanfan;;Auto-normalization algorithm for robotic precision drilling system in aircraft component assembly[J];Chinese Journal of Aeronautics;2013年02期

5 邵曼;賈慶軒;孫漢旭;陳鋼;;一種基于接觸力分析進行對接的控制策略[J];機電產品開發與創新;2012年01期

6 宋丹;趙保軍;唐林波;;融合角點特征與顏色特征的Mean-Shift目標跟蹤算法[J];系統工程與電子技術;2012年01期

7 鄒樹梁;鄒e，

本文編號：1956592