金屬硅高溫造渣除硼工藝的研究
發布時間：2018-12-13 11:02
【摘要】：本文的研究目的是探索和改進低成本冶金物理法太陽能級多晶硅的制備工藝，并提出了一種基于氧化物高溫固相反應的造渣萃取除硼的金屬硅提純方法，該方法在傳統的金屬硅“造渣法”提純技術的基礎上，主要通過Al2O3與SiO2或MgO之間能夠在高溫下發生固相反應分別生成莫來石或尖晶石，同時其反應速度可通過原材料晶體結構和微觀形貌的選擇或者通過添加其它氧化物達到可控性的特點，實現可控性的高溫固相反應。固相反應過程中，反應產物的各組份原子重新排列形成新的晶格，由于B具有極小的原子半徑，熔融的液態硅中B雜質極易進入該晶格的間隙位中，因此本方法對去除金屬硅中的B雜質有較顯著的效果，同時對其它雜質也有良好的去除效果。本方法具有成本低廉、操作簡單的特點。
[Abstract]:The purpose of this paper is to explore and improve the preparation process of solar-grade polysilicon by low-cost metallurgical physical method, and to propose a method of metal silicon purification by slag extraction and removal of boron based on high temperature solid state reaction of oxide. Based on the traditional "slag forming method" of metal silicon, mullite or spinel can be formed by solid state reaction between Al2O3 and SiO2 or MgO at high temperature. At the same time, the reaction rate can be controlled by selecting the crystal structure and microstructure of raw materials or by adding other oxides to achieve controllability. In the process of solid state reaction, the atoms of each component of the product rearrange to form a new lattice. Because B has a very small atomic radius, B impurities in molten liquid silicon can easily enter the gap potential of the crystal lattice. Therefore, this method has remarkable effect on removing B impurity in metal silicon, and also has good effect on other impurity removal. The method has the characteristics of low cost and simple operation.
【學位授予單位】：南昌大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN304.12
本文編號：2376429
[Abstract]:The purpose of this paper is to explore and improve the preparation process of solar-grade polysilicon by low-cost metallurgical physical method, and to propose a method of metal silicon purification by slag extraction and removal of boron based on high temperature solid state reaction of oxide. Based on the traditional "slag forming method" of metal silicon, mullite or spinel can be formed by solid state reaction between Al2O3 and SiO2 or MgO at high temperature. At the same time, the reaction rate can be controlled by selecting the crystal structure and microstructure of raw materials or by adding other oxides to achieve controllability. In the process of solid state reaction, the atoms of each component of the product rearrange to form a new lattice. Because B has a very small atomic radius, B impurities in molten liquid silicon can easily enter the gap potential of the crystal lattice. Therefore, this method has remarkable effect on removing B impurity in metal silicon, and also has good effect on other impurity removal. The method has the characteristics of low cost and simple operation.
【學位授予單位】：南昌大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN304.12
【參考文獻】
相關期刊論文 前6條
1 蔣榮華,肖順珍;國內外多晶硅發展現狀[J];半導體技術;2001年11期
2 曾憲津;繆秀珍;孫雅茹;劉春蘭;關勝利;黃本立;;土壤和沉積物樣品ICP-AES多元素同時分析基體元素的干擾及其修正[J];分析化學;1986年07期
3 楊國鑫;鄭永孝;;多晶硅產業現狀與發展趨勢分析[J];煤;2007年03期
4 王宇，尹盛，肖成章，，何笑明，王敬義;硅材料濕法提純理論分析及工藝優化[J];太陽能學報;1995年02期
5 馬文會;戴永年;楊斌;劉大春;王華;;太陽能級硅制備新技術研究進展[J];新材料產業;2006年10期
6 李冰,馬新榮,楊紅霞,何紅蓼;封閉酸溶-電感耦合等離子體原子發射光譜法同時測定地質樣品中硼砷硫[J];巖礦測試;2003年04期
本文編號：2376429
本文鏈接：http://www.wukwdryxk.cn/kejilunwen/dianzigongchenglunwen/2376429.html
最近更新
教材專著
