接觸型局域SP光刻直寫頭的懸持結構設計及仿真分析
發布時間：2019-05-21 15:14
【摘要】：光刻技術在半導體工業中扮演著重要的角色,但衍射極限的存在限制了傳統光學光刻在光刻分辨率上的進一步提高。由近場光學發展而來的近場光刻為突破衍射極限提供了新的思路,但光通率不高導致其光刻質量不佳�；诒砻娴入x子體激元的近場光刻具有透射增強效應,使得光刻的分辨率和成像質量得到顯著提高。等離子體直寫光刻作為表面等離子體光刻技術的一種,光刻時無需掩模,能夠?qū)崿F(xiàn)任意圖形的刻寫,且光刻系統簡單,成本較低,是一種理想的納米光刻技術。掃描探針光刻作為一種重要的直寫光刻方式,常采用懸臂梁探針結構。但懸臂梁受力容易彎曲變形,造成探針的位置精度誤差。本文設計了一種具有雙固支彈性臂的圓形彈簧作為掃描探針的懸持結構,提高光刻時探針的位置精度。彈性臂設計為圓弧形,彈性臂數為四個。通過調節彈性臂的有效臂長、寬度和厚度,實現較合理的彈簧剛度。通過理論分析了懸臂梁探針結構在接觸模式和掃描模式下的探針位置精度,并利用有限元分析軟件對兩種探針懸持結構在兩種工作模式下的位置精度進行了仿真對比。在接觸模式下,懸臂梁探針產生水平位移,而圓形彈簧探針不會產生水平位移,位置精度得到較大提高;在掃描模式下,懸臂梁探針結構沿著不同方向掃描時,探針產生不同的水平位移;圓形彈簧探針結構的探針?biāo)轿灰撇浑S掃描方向的變化而變化,位置精度得到提高。對圓形彈簧應用于接觸型局域表面等離子體直寫光刻進行了動態仿真,通過優化結構參數,仿真結果達到預期效果。光刻時,圓形彈簧變形產生的彈性力能夠保證探針與光刻膠的穩定接觸;在接觸模式下,圓形彈簧保持探針上升姿態垂直,不會發生偏轉;在掃描模式下,圓形彈簧保持探針偏角角度恒定不變,探針刻寫姿態穩定;在相同的位移載荷和掃描速度下,沿不同方向掃描時圓形彈簧使探針具有相同的繞xy平面的偏轉角度。利用圓形彈簧的自適應性,在不超過探針允許傾斜角度的最大位移載荷下,能夠調整1.5′的相對傾斜角度,并且在傾斜的光刻膠表面光刻時,圓形彈簧保證探針適應光刻膠表面的位置變化。完成接觸型局域表面等離子體直寫光刻系統的實驗平臺設計,并對關鍵部件進行選型和采購,確定掃描過程中探針刻寫姿態的檢測方案。
[Abstract]:The lithography technology plays an important role in the semiconductor industry, but the existence of the diffraction limit limits the further improvement of the conventional optical lithography in the photoetching resolution. The near-field lithography, which is developed from near-field optics, provides a new way to break the diffraction limit, but the light-pass rate is not high, resulting in poor lithographic quality. The near-field lithography based on surface plasmons has a transmission-enhancing effect, so that the resolution of the photolithography and the imaging quality are significantly improved. The plasma direct-writing lithography is used as one of the surface plasma photoetching technology, and can realize the writing of any pattern without a mask during the photoetching, and the photoetching system is simple and the cost is low, and is an ideal nano-photoetching technology. Scanning probe lithography, as an important direct-write lithographic method, is often used as a cantilever beam probe structure. But the force of the cantilever beam is easy to be bent and deformed, and the position precision error of the probe is caused. In this paper, a circular spring with two elastic arms is designed as the suspension structure of the scanning probe, and the position accuracy of the probe is improved. The elastic arm is designed in a circular arc shape, and the number of the elastic arms is four. By adjusting the effective arm length, width and thickness of the elastic arm, the reasonable spring rate is realized. The probe position accuracy of the cantilever beam probe structure under the contact mode and the scanning mode is analyzed by the theory, and the position accuracy of the two kinds of probe suspension structures under two working modes is simulated by using the finite element analysis software. in the contact mode, the cantilever beam probe generates a horizontal displacement, and the circular spring probe does not generate a horizontal displacement, and the position accuracy is greatly improved; in the scanning mode, when the cantilever beam probe structure is scanned in different directions, the probe generates different horizontal displacements; The probe horizontal displacement of the circular spring probe structure does not change with the change of the scanning direction, and the position accuracy is improved. The dynamic simulation of the circular spring applied to the contact type local surface plasma direct-write lithography is carried out, and the expected effect is achieved by the structure parameters. in the photoetching process, the elastic force generated by the deformation of the circular spring can ensure the stable contact of the probe and the photoresist; in the contact mode, the circular spring keeps the probe rising posture to be vertical and does not deflect; in the scanning mode, the circular spring keeps the angle of the probe angle of the probe constant, The probe has a stable writing posture; at the same displacement load and scanning speed, the circular spring makes the probe have the same deflection angle about the xy-plane at the time of scanning in different directions. With the self-adaptability of the circular spring, the relative inclination angle of 1.5% can be adjusted without exceeding the maximum displacement load of the probe allowing the inclination angle, and when the inclined photoresist surface is photoetching, the circular spring ensures that the probe is adapted to the position change of the surface of the photoresist. The design of the experimental platform of the contact type local surface plasma direct writing lithography system is completed, and the key parts are selected and purchased, and the detection scheme of the probe writing posture in the scanning process is determined.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN305.7
，
本文編號：2482186
[Abstract]:The lithography technology plays an important role in the semiconductor industry, but the existence of the diffraction limit limits the further improvement of the conventional optical lithography in the photoetching resolution. The near-field lithography, which is developed from near-field optics, provides a new way to break the diffraction limit, but the light-pass rate is not high, resulting in poor lithographic quality. The near-field lithography based on surface plasmons has a transmission-enhancing effect, so that the resolution of the photolithography and the imaging quality are significantly improved. The plasma direct-writing lithography is used as one of the surface plasma photoetching technology, and can realize the writing of any pattern without a mask during the photoetching, and the photoetching system is simple and the cost is low, and is an ideal nano-photoetching technology. Scanning probe lithography, as an important direct-write lithographic method, is often used as a cantilever beam probe structure. But the force of the cantilever beam is easy to be bent and deformed, and the position precision error of the probe is caused. In this paper, a circular spring with two elastic arms is designed as the suspension structure of the scanning probe, and the position accuracy of the probe is improved. The elastic arm is designed in a circular arc shape, and the number of the elastic arms is four. By adjusting the effective arm length, width and thickness of the elastic arm, the reasonable spring rate is realized. The probe position accuracy of the cantilever beam probe structure under the contact mode and the scanning mode is analyzed by the theory, and the position accuracy of the two kinds of probe suspension structures under two working modes is simulated by using the finite element analysis software. in the contact mode, the cantilever beam probe generates a horizontal displacement, and the circular spring probe does not generate a horizontal displacement, and the position accuracy is greatly improved; in the scanning mode, when the cantilever beam probe structure is scanned in different directions, the probe generates different horizontal displacements; The probe horizontal displacement of the circular spring probe structure does not change with the change of the scanning direction, and the position accuracy is improved. The dynamic simulation of the circular spring applied to the contact type local surface plasma direct-write lithography is carried out, and the expected effect is achieved by the structure parameters. in the photoetching process, the elastic force generated by the deformation of the circular spring can ensure the stable contact of the probe and the photoresist; in the contact mode, the circular spring keeps the probe rising posture to be vertical and does not deflect; in the scanning mode, the circular spring keeps the angle of the probe angle of the probe constant, The probe has a stable writing posture; at the same displacement load and scanning speed, the circular spring makes the probe have the same deflection angle about the xy-plane at the time of scanning in different directions. With the self-adaptability of the circular spring, the relative inclination angle of 1.5% can be adjusted without exceeding the maximum displacement load of the probe allowing the inclination angle, and when the inclined photoresist surface is photoetching, the circular spring ensures that the probe is adapted to the position change of the surface of the photoresist. The design of the experimental platform of the contact type local surface plasma direct writing lithography system is completed, and the key parts are selected and purchased, and the detection scheme of the probe writing posture in the scanning process is determined.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN305.7
，
本文編號：2482186
本文鏈接：http://www.wukwdryxk.cn/kejilunwen/dianzigongchenglunwen/2482186.html
最近更新
教材專著
