發布時間：2018-07-20 20:17

【摘要】：能源問題是現今各個國家的主要問題之一。節約油資源也是當今社會主要考慮的問題之一。渦旋壓縮機是一種新型的容器式壓縮機,由于在性能與結構上的諸多優點,其應用領域越來越廣泛,并在制冷與空調、泵送液體、增壓氣體等方面已獲得工業化應用。渦旋式壓縮機性能的決定因素是渦旋型線的設計理論,這也一直是各國學者研究的熱點。 本文首先對渦旋壓縮機的幾何理論進行研究。提出基于泛函的通用渦旋型線由幾何共扼型線構成,根據平面曲線弧微分固有方程理論和Taylor級數思想,任意函數曲線的數學表達式都可以將其展開為切向角參數φ的級數的弧函數形式。并推演出基于泛函的通用渦旋型線的幾何理論,平面共軛理論;在笛卡爾坐標下得出其坐標表征;并給出算例予以說明。 對通用渦旋型線變化規律進行研究。以泛函的分析理論、級數思想為基礎,利用基于泛函的通用渦旋型線的幾何理論,以壓縮比為目標函數,得出基于泛函的通用渦旋型線變化規律及收斂級數。知級數項k值大于3時為變壁厚的渦旋型線,公轉半徑Ror大盤直徑D型線圈數N與k值是壓縮比主要影響因素,建立收斂級數最佳的渦旋型線模型,利用基于MATLAB的遺傳算法,優化出在給定條件下的最佳目標值,并給出最佳渦旋型線方程。 以基于泛函通用渦旋型線構成的變壁厚渦旋盤為研究對象,建立了以能效比為目標函數的結構參數優化模型,分析了渦旋壓縮機壓縮過程中的由排氣容積變化而引起的熱能變化以及能效比變化。以能效比為目標函數、渦旋盤結構參數以及型線方程為變量,利用遺傳算法得到能效比最優化時的變量,得出了形狀性態良好的渦旋型線。 對通用渦旋型線壓縮機建模仿真及動渦盤進行有限元分析。研究了通用渦旋型線集成型線渦旋壓縮機的運動仿真的建�；�礎,利用MATLAB軟件得到了關于切向角參數系列點列,利用PRO/ENGINEER軟件來生成動、靜渦旋型線和動、靜渦旋盤。根據渦旋壓縮機運動結構,建立了通用渦旋型線集成型線渦旋壓縮機的動態仿真模型。并對通用渦旋型線集成型線壓縮機的動渦盤進行了有限元分析,得出了在運動狀態及氣體力作用下的受力情況。
[Abstract]:Energy problem is one of the main problems in every country nowadays. Saving oil resources is also one of the main problems to be considered in the society today. Scroll compressor is a new type of container compressor. Because of its many advantages in performance and structure, its application field is more and more extensive, and has been applied in refrigeration and air conditioning, pumping liquid, pressurized gas and so on. The design theory of vortex profile is the decisive factor of the performance of scroll compressor, which has always been a hot research topic of scholars all over the world. Firstly, the geometric theory of scroll compressor is studied in this paper. A general vortex line based on functional is proposed, which is composed of geometric conjugate lines. According to the theory of plane curve arc differential inherent equation and Taylor series thought, The mathematical expression of any function curve can be expanded into the arc function form of the series of tangential angle parameter 蠁. The geometric theory of the general vortex line based on functional, the plane conjugate theory, the representation of the coordinates in Cartesian coordinates are derived, and an example is given to illustrate this theory. The variation law of general vortex profile is studied. Based on the theory of functional analysis and the thought of series, using the geometric theory of the general vortex profile based on functional and taking the compression ratio as the objective function, the variation law and convergent series of the general vortex line based on functional are obtained. It is known that the series term k > 3 is a vortex line with variable wall thickness, and the number of D type coils N and k are the main factors affecting the compression ratio. The optimal vortex line model of convergent series is established, and the genetic algorithm based on MATLAB is used. The optimal target value under given conditions is optimized and the optimal vortex curve equation is given. A structural parameter optimization model with energy efficiency ratio (EER) as the objective function is established based on the variable wall thickness vortex disk based on functional general vortex profile. The change of heat energy and energy efficiency ratio caused by the change of exhaust volume in the compression process of scroll compressor is analyzed. With the energy efficiency ratio as the objective function, the vortex disk structure parameters and the shape line equation as the variables, the genetic algorithm is used to obtain the variables when the energy efficiency ratio is optimized, and the vortex curve with good shape is obtained. The modeling and simulation of the general scroll line compressor and the finite element analysis of the moving vortex disc are carried out. In this paper, the modeling foundation of general vortex line integrated line scroll compressor motion simulation is studied. A series of points about tangential angle parameters are obtained by using MATLAB software, and the moving and static vortex lines and moving and static vortex disks are generated by PRO/ ENGINEER software. According to the moving structure of scroll compressor, the dynamic simulation model of general vortex line integrated scroll compressor is established. The finite element analysis of the moving vortex disk of the general vortex line integrated line compressor is carried out, and the force situation under the action of the moving state and the gas force is obtained.
【學位授予單位】：重慶工商大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH45

【參考文獻】

相關期刊論文 前10條

1 王立存;陳進;;基于多學科設計優化的通用渦旋型線形狀優化[J];華中科技大學學報(自然科學版);2008年03期

2 唐云嵐;趙青松;高妍方;陳英武;;Pareto最優概念的多目標進化算法綜述[J];計算機科學;2008年10期

3 賀小明,曾釹釙;Pro/E行為建模技術在機械設計中的應用[J];機械設計與制造;2005年05期

4 陳浩;張躍明;卜凡華;;基于MATLAB的弧面分度凸輪的截面齒形分析[J];機械設計與制造;2007年02期

5 崔利杰;龔小平;;基于MATLAB運動仿真的平面多連桿機構優化設計[J];機械設計與制造;2007年02期

6 樊靈,屈宗長,靳春梅;渦旋壓縮機型線研究的概述[J];機械工程學報;2000年09期

7 陳進,張永棟,宋立權,王立存;基于多目標遺傳算法的渦旋型線形狀優化[J];機械工程學報;2005年01期

8 陳進;王立存;李世六;;通用渦旋型線理論研究與深入分析[J];機械工程學報;2006年05期

9 王立存;陳進;李世六;何景熙;;基于泛函的渦旋型線共軛嚙合理論[J];機械工程學報;2007年03期

10 趙俊偉,黃俊杰,陳國強;基于Pro/E的串并聯機床幾何建模和運動仿真[J];機械制造;2005年02期

相關博士學位論文 前2條

1 陳楠;大冷量斯特林制冷機用動磁式直線壓縮機關鍵部件及整機性能研究[D];上海交通大學;2007年

2 王立存;通用渦旋型線集成設計理論與方法研究[D];重慶大學;2007年

相關碩士學位論文 前3條

1 張永棟;基于多目標遺傳算法的渦旋型線形狀優化設計研究[D];重慶大學;2004年

2 王作洪;制冷渦旋壓縮機的仿真與優化[D];蘭州理工大學;2006年

3 張波;渦旋壓縮機實體建模與傳動系統動力學分析[D];東北大學;2006年

，

本文編號：2134655