細胞介電泳空間操作及微組裝的自動化技術研究
發布時間：2024-05-21 20:07
組織工程學是一門多學科交叉的研究領域,其目的是在體外構建人造組織,然后將其移植到體內進行組織的修復和再生。組織的構造通常包括兩個主要的步驟,首先是從病人的骨髓中取得干細胞,隨后將這些細胞在生物相容性的支架上進行培養以此來促使組織的發育。然而大多數現有的支架結構都過于簡單,難以控制細胞的分布。本論文中,我們設計了新型的生物支架結合介電泳技術來實現細胞在支架上的自動種植。本文由以下三個方面展開:首先,提出了一種由多層生物相容性材料構成的新型生物支架,該支架結合介電泳技術實現了對生物細胞的三維操作和排列。我們檢驗了不同的工藝參數對三維細胞構型的質量和細胞成活率的影響。實驗結果表明我們所提出的三維支架能夠利用介電泳力機理實現細胞的自動排列,從而構建組織工程學上所需的人造組織。不同的外加電壓所產生的電場力對被操作生物細胞生存率的影響也做了評估,選擇了最合適的外加電場。其次,設計了一種蜂窩狀的模擬原始骨組織結構的多孔生物支架。該支架能夠自動將細胞排列成多層的蜂窩狀構型。我們使用三種不同的哺乳動物的細胞進行實驗,以檢測影響蜂窩狀細胞構型形成過程中的不同因素。我們還對材料的生物相容性進行了測試,以保證...
【文章頁數】：112 頁
【學位級別】：博士
【文章目錄】：
摘要
ABSTRACT
Chapter 1 Introduction
1.1 Background
1.2 Statement of Problems
1.3 Research Objectives
1.4 Methodology and Significance
1.5 Conclusion
Chapter 2 Literature Review
2.1 Introduction
2.2 Cell Manipulation Technologies
2.2.1 Optical Tweezers
2.2.2 Magnetic
2.2.3 DEP
2.2.4 Mechanical
2.3 Microfabrication Techniques
2.3.1 2D Planar Electrode Fabrication
2.3.2 3D Electrode Fabrication
2.4 Different Electrodes for DEP Manipulation
2.4.1 2D Planar Microelectrodes
2.4.2 3D Microelectrodes
2.5 Conclusion
Chapter 3 Development of Multilayer Scaffold for 3D Cell Manipulation andPatterning
3.1 Introduction
3.2 Materials and Methods
3.2.1 Multilayer Scaffold Structure Design
3.2.2 Scaffold Fabrication and Assembly
3.2.3 Hardware Setup
3.3 Results and Discussions
3.3.1 Effect of Supply Voltage Input on Multilayer Structure
3.3.2 Characterization of 3D Cellular Pattern
3.3.3 Biocompatibility of Scaffold for Cell Culture
3.3.4 Assessment of Cell Viability after Cell Patterning by DEP
3.3.5 Assessment of Cellular Pattern after Culture
3.4 Conclusions
Chapter 4 Characterization of Honeycomb-patterned Scaffold with DEP-basedPatterning for Bone TE
4.1 Introduction
4.2 Materials and Methods
4.2.1 Scaffold Design
4.2.2 Fabrication
4.2.3 Cell Culture
4.2.4 Cell Preparation for DEP Manipulation
4.2.5 Experimental Setup for DEP-based Cell Patterning
4.3 Results and Discussion
4.3.1 Effects of Input Voltage Frequency
4.3.2 Effects of Material on Cell Culture
4.3.3 Cell Viability during DEP Patterning
4.3.4 Patterning Efficiency
4.4 Conclusions
Chapter 5 Development of Engineered Bone Scaffolds with DEP-basedPatterning utilizing 3D Printing
5.1 Introduction
5.2 Materials and Methods
5.2.1 Scaffold Design
5.2.2 Scaffold Fabrication
5.2.3 Cell Preparation
5.2.4 DEP Cell Patterning
5.2.5 Bone Nodule Formation
5.3 Results and Discussion
5.3.1 Scaffold Characterization
5.3.2 DEP Patterning
5.3.3 Bone Nodule formation
5.4 Conclusions
Chapter 6 Conclusion and Future Work
6.1 Conclusion
6.2 Future Work
Chapter 7 結束語
7.1 主要工作與貢獻
7.2 研究前景和展望
Reference
致謝
在讀期間發表的學術論文與取得的其他研究成果
中文簡介
本文編號：3979862
【文章頁數】：112 頁
【學位級別】：博士
【文章目錄】：
摘要
ABSTRACT
Chapter 1 Introduction
1.1 Background
1.2 Statement of Problems
1.3 Research Objectives
1.4 Methodology and Significance
1.5 Conclusion
Chapter 2 Literature Review
2.1 Introduction
2.2 Cell Manipulation Technologies
2.2.1 Optical Tweezers
2.2.2 Magnetic
2.2.3 DEP
2.2.4 Mechanical
2.3 Microfabrication Techniques
2.3.1 2D Planar Electrode Fabrication
2.3.2 3D Electrode Fabrication
2.4 Different Electrodes for DEP Manipulation
2.4.1 2D Planar Microelectrodes
2.4.2 3D Microelectrodes
2.5 Conclusion
Chapter 3 Development of Multilayer Scaffold for 3D Cell Manipulation andPatterning
3.1 Introduction
3.2 Materials and Methods
3.2.1 Multilayer Scaffold Structure Design
3.2.2 Scaffold Fabrication and Assembly
3.2.3 Hardware Setup
3.3 Results and Discussions
3.3.1 Effect of Supply Voltage Input on Multilayer Structure
3.3.2 Characterization of 3D Cellular Pattern
3.3.3 Biocompatibility of Scaffold for Cell Culture
3.3.4 Assessment of Cell Viability after Cell Patterning by DEP
3.3.5 Assessment of Cellular Pattern after Culture
3.4 Conclusions
Chapter 4 Characterization of Honeycomb-patterned Scaffold with DEP-basedPatterning for Bone TE
4.1 Introduction
4.2 Materials and Methods
4.2.1 Scaffold Design
4.2.2 Fabrication
4.2.3 Cell Culture
4.2.4 Cell Preparation for DEP Manipulation
4.2.5 Experimental Setup for DEP-based Cell Patterning
4.3 Results and Discussion
4.3.1 Effects of Input Voltage Frequency
4.3.2 Effects of Material on Cell Culture
4.3.3 Cell Viability during DEP Patterning
4.3.4 Patterning Efficiency
4.4 Conclusions
Chapter 5 Development of Engineered Bone Scaffolds with DEP-basedPatterning utilizing 3D Printing
5.1 Introduction
5.2 Materials and Methods
5.2.1 Scaffold Design
5.2.2 Scaffold Fabrication
5.2.3 Cell Preparation
5.2.4 DEP Cell Patterning
5.2.5 Bone Nodule Formation
5.3 Results and Discussion
5.3.1 Scaffold Characterization
5.3.2 DEP Patterning
5.3.3 Bone Nodule formation
5.4 Conclusions
Chapter 6 Conclusion and Future Work
6.1 Conclusion
6.2 Future Work
Chapter 7 結束語
7.1 主要工作與貢獻
7.2 研究前景和展望
Reference
致謝
在讀期間發表的學術論文與取得的其他研究成果
中文簡介
本文編號：3979862
本文鏈接：http://www.wukwdryxk.cn/shoufeilunwen/jckxbs/3979862.html
最近更新
教材專著
