發布時間：2018-06-04 19:51

  本文選題：船舶裝飾 + 工程CAD��； 參考：《華中科技大學》2008年碩士論文

【摘要】： 在傳統船舶裝飾設計中,主要設計手段是簡單利用CAD工具,存在數據輸入量大,圖面設計和審核工作量大,設計隨意性強,難以進行統計清冊的問題。本文通過開發船舶裝飾專業CAD系統為解決上述問題提供了有效的方案。 船舶裝飾設計中的主要設計內容是對裝飾板材進行圖面布置,而板材的布置可以歸結為二維布局問題。針對布局問題中的布局對象即布局空間和布局物體,本文中把設計過程劃分為底圖處理,板材布置兩個過程,然后分別給出了相應的CAD策略。在板材布置的基礎上,結合圖面檢查等輔助功能,最終給出了系統的整體框架。 首先,針對板材布置中的布局空間的表達,進行底圖處理:在繪制底圖基線的基礎上,通過最小單聯通區域識別等算法求出基本布局空間實體,然后利用接長梁等圖元對基本布局空間實體進行分割,最終得到布局空間的邊界表達形式。 其次,對于板材的布置,采用適當形式對不同板材分別進行表達,并根據實際設計規則總結出板材布局的約束條件,然后依據約束條件提出相應的布局算法策略并加以實現。在布局空間和布局算法確定的基礎上,最終實現板材的布置功能。 對于較為復雜的編輯修改問題,文中提出了新的解決思路:首先提取布板方法并建立修改觸發機制,接著通過觸發機制來調用修改后的布局空間和布板方法,對布板過程進行重新計算,最終達到編輯修改的目的。 最后,應用以上分析成果,對船舶裝飾專業CAD系統中的圖面設計模塊進行了研究和開發;并通過一個設計實例,驗證了該系統的實現。同時,從進一步提高設計效率和與產品管理系統集成的角度,提出了對未來工作的展望。
[Abstract]:In the traditional ship decoration design, the main design means is simply using CAD tools, which has the problems of large input of data, large workload of drawing design and examination, and strong randomness of design, which makes it difficult to carry out statistical inventory. This paper provides an effective scheme for solving the above problems by developing the CAD system of ship decoration specialty. The main design content of ship decoration design is to arrange the graphic surface of the decorative plate, and the layout of the plate can be summed up to the problem of two-dimensional layout. In this paper, the design process is divided into two processes, namely, layout space and layout object, and the design process is divided into two processes: bottom map processing and plate layout. Then the corresponding CAD strategies are given. On the basis of plate layout, combined with the auxiliary functions such as surface inspection, the whole frame of the system is finally given. Firstly, base map processing is carried out for the representation of layout space in plate layout: on the basis of drawing base line of base map, The basic layout space entity is obtained by using the minimum single connection region recognition algorithm, and then the basic layout space entity is segmented by using graph elements such as long beam connection, and the boundary expression form of the layout space is obtained finally. Secondly, for the plate layout, the boundary representation of the layout space is obtained. According to the practical design rules, the constraints of plate layout are summarized, and the corresponding layout algorithm strategy is put forward according to the constraint conditions. On the basis of the layout space and the layout algorithm, the layout function of the plate is finally realized. For the more complicated editing and modifying problem, a new solution is put forward: firstly, the layout method is extracted and the trigger mechanism of the modification is established. Then through the trigger mechanism to call the modified layout space and the layout method, the layout process is recalculated, finally the purpose of editing and modification is achieved. Finally, the above analysis results are applied. This paper studies and develops the drawing design module in the CAD system of ship decoration, and verifies the realization of the system by a design example. At the same time, from the point of further improving the design efficiency and integrating with the product management system, the prospect of future work is put forward.
【學位授予單位】：華中科技大學
【學位級別】：碩士
【學位授予年份】：2008
【分類號】：U662.9

【參考文獻】

相關期刊論文 前10條

1 李書紅;李西琴;趙姍姍;;基于ObjectARX的AutoCAD圖形區域劃分算法研究[J];工程圖學學報;2006年04期

2 吳紅丹;梅樹立;李麗;王海華;;采用ObjectARX 2006的多段線自動生成及編輯[J];工程圖學學報;2007年02期

3 陳琪,徐林林,高潔;CAD技術的發展趨勢[J];機電產品開發與創新;2002年04期

4 張偉萍;機械設計與CAD的發展[J];現代技能開發;2002年08期

5 黃崇斌;二維板材優化下料快速搜索法[J];計算機輔助工程;2000年01期

6 曹炬;實用異形件優化排樣系統的研究與開發[J];計算機工程與應用;1999年10期

7 王金敏,王玉新,查建中;布局問題約束的分類及表達[J];計算機輔助設計與圖形學學報;2000年05期

8 劉嘉敏,張勝男,黃有群;二維不規則形狀自動排料算法的研究與實現[J];計算機輔助設計與圖形學學報;2000年07期

9 胡敏,姜曉紅,石教英;一種有效的從CAD工程圖樣自動提取零部件信息的方法及其實現[J];計算機輔助設計與圖形學學報;2000年10期

10 金文華,黃崢,呂志宏,饒上榮,黃永紅,唐衛清,劉慎權;工程CAD材料統計表自動生成系統中的層次模板技術[J];計算機輔助設計與圖形學學報;2001年02期

，

本文編號：1978632