發布時間：2018-05-04 18:03

  本文選題：置換蒸煮系統 + 溫度一致性控制��； 參考：《陜西科技大學》2017年碩士論文

【摘要】：造紙工業是我國的重要基礎原料產業,但它的發展一直被高能耗、大污染和不合理的原料結構等問題所困擾。制漿是造紙工業的重要組成部分,當前仍沿用常規間歇式蒸煮工藝,能耗高、得率低,且后續漂白工段只能采用三段漂或四段漂,對環境的污染較大。而置換蒸煮技術,通過在蒸煮鍋之外設置溫黑液、熱黑液、熱白液等槽罐,將蒸煮工藝分為多個步驟進行,從而實現黑液里面的熱能和化學品的回收再利用,后續漿料也可以采用新近研發出來的無元素氯漂或全無氯漂等先進漂白工藝,是一項節能環保的新型間歇式制漿技術,在美國、加拿大等造紙技術發達的國家已經被研發成熟并得以廣泛應用。雖然我國已經成功引進了置換蒸煮技術,但是由于其蒸煮機理復雜、蒸煮流程繁冗且內部聯鎖復雜,因此國內目前仍沒有一套功能完善且擁有自主知識產權的置換蒸煮全集成控制系統,所采用的置換蒸煮控制系統都是由ABB、Honeywell、SIEMENS等國外公司提供,成本昂貴,只有實力比較雄厚的大漿廠才有能力采購,因此實現置換蒸煮控制系統的國產化有利于置換蒸煮技術在我國的推廣應用�；�于上述原因,本碩士論文在科技部國家國際合作項目“節能環保型置換蒸煮關鍵技術與設備的合作研究”的資助下,以廣西馬山和發強紙業有限公司置換蒸煮DCS項目為依托,結合國合項目引進的技術資料對置換蒸煮生產溶解漿和化學漿的控制過程進行詳細剖析,并從控制難點的研究與解決策略、控制方案設計、上位機程序設計與實現三個方面展開應用技術研究,具體研究?jī)?nèi)容如下:(1)控制難點的研究與解決策略以國合項目引進的GLV技術資料為依據,對置換蒸煮工藝過程控制進行詳細剖析,在此基礎之上解決置換蒸煮系統應用過程中的三個難點問題。其中針對蒸煮鍋溫差問題,設計了神經網絡串級解耦PID控制算法,解決了溫差控制的時滯性、時變性和非線性等難點;針對偏流問題,通過分析設計了通道的檢測和破壞方案,保證蒸煮過程中藥液以近活塞流的方式流動;針對卸料泵汽蝕問題,通過控制卸料濃度并結合變速卸料、補償有效汽蝕余量的方法,保證在整個卸料過程中NPSHa大于NPSHr。(2)置換蒸煮控制方案的設計研究針對置換蒸煮工藝過程,提出了主順序和子順序相結合的控制方案,實現工藝過程的自動化;通過建模分析得到了基于物料平衡的槽區液位控制策略,使槽區液位始終保持在10%~90%之間,滿足了置換蒸煮系統正常生產的要求;設計了冗余、聯鎖、診斷等方案,保證控制系統安全有效地運行,并通過OPC接口技術使MATLAB和PLC相結合,便于高級控制算法在置換蒸煮系統中的應用。(3)基于S7-400 PLC的控制系統的設計與實現以西門子S7-400 PLC為主體控制硬件,PCS7為軟件開發工具,根據所提出的難點問題解決策略以及各控制方案,進行了DCS控制系統硬件、軟件設計,使得所提出的解決策略和控制方案可應用于實際生產。本碩士論文剖析了GLV公司的置換蒸煮工藝,在此基礎之上對置換蒸煮系統應用過程中的三個難點問題進行了分析和解決,并設計出了工藝自動化等控制方案,根據所提出的各難點解決策略及工藝自動化等控制方案,完成了DCS硬件、軟件設計,在廣西馬山和發強紙業有限公司的實際應用結果表明,本碩士論文所研究設計的控制系統,可以很好地滿足工業生產的實際需求。
[Abstract]:The paper industry is an important basic raw material industry in China, but its development has been plagued by high energy consumption, large pollution and unreasonable raw material structure. Pulping is an important part of the paper industry. At present, the conventional batch cooking process is still used, with high energy consumption and low yield, and only three or four stage bleaching can be used in the subsequent bleaching section. The pollution of the environment is great, and the replacement steaming technology can be divided into several steps by setting the hot black liquid, hot black liquid and hot white liquid outside the cooking pot, so as to realize the heat and chemical recycling in the black liquor, and the following slurry can also be used newly developed without chlorine bleaching or all chlorine bleaching. Advanced bleaching technology, which is a new type of intermittent pulping technology with energy saving and environmental protection, has been developed and widely used in the developed countries such as the United States and Canada. Although the replacement cooking technology has been successfully introduced in our country, the cooking process is complicated and the internal interlocking is complex because of its complicated cooking mechanism. At present, there is still not a complete set of complete integrated control system with complete function and independent intellectual property right. The replacement steaming control system is provided by foreign companies such as ABB, Honeywell, SIEMENS and so on. It is expensive, only the large pulp factory with strong strength has the ability to purchase, so the replacement cooking control system is realized. Based on the above reasons, the master's thesis, supported by the cooperation of the national international cooperation project of the Ministry of science and technology, "the cooperation of the key technology and equipment of the energy saving and environmental replacement steaming", is supported by the replacement of the DCS project of the Guangxi Mashan and the development of the paper industry Co., Ltd. The technical data introduced by the project are analyzed in detail for the control process of dissolving pulp and chemical pulp produced by replacement steaming, and the application technology is researched from three aspects: the research and solution strategy of the control difficulties, the design of control scheme, the program design and implementation of the upper computer, and the specific research is as follows: (1) the research and solution strategy of the control difficulty Based on the GLV technical data introduced by the national project, the control of the replacement steaming process is analyzed in detail. On this basis, three difficult problems in the application process of the replacement cooking system are solved. In view of the problem of the temperature difference of the cooking pot, a cascade decoupling PID control algorithm is designed to solve the time delay of the temperature difference control. By analyzing and designing the detection and failure scheme of the channel in order to ensure the flow of the near piston flow in the cooking process, the method of controlling the discharge concentration and compensating the effective cavitation allowance to ensure the NPSH in the whole unloading process is guaranteed. The design of a more than NPSHr. (2) replacement steaming control scheme is designed for the replacement steaming process. The control scheme combining the main sequence and the subsequence is proposed to realize the automation of the process. The liquid level control strategy based on the material balance is obtained by modeling and analysis, so that the liquid level of the slot area is kept between the 10%~90% and the liquid level. The requirements of normal production of replacement cooking system; design redundancy, interlocking, diagnosis and so on to ensure the safe and effective operation of the control system, and combine MATLAB and PLC through OPC interface technology to facilitate the application of the advanced control algorithm in the replacement cooking system. (3) the design and implementation of the control system based on S7-400 PLC based on the SIEMENS S7-400 PL C is the main control hardware, and PCS7 is a software development tool. According to the difficult problem solving strategy and the control scheme, the hardware of the DCS control system and the software are designed. The proposed solution strategy and control scheme can be applied to the actual production. The master's thesis analyses the replacement steaming technology of GLV company, on this basis The three difficult problems in the application process of the replacement cooking system are analyzed and solved, and a process automation control scheme is designed. According to the difficulty solutions and process automation control schemes, the DCS hardware and software design are completed, and the actual application results of the Guangxi Mashan and the hair strong Paper Co., Ltd. are completed. It shows that the control system designed by this master thesis can well meet the actual needs of industrial production.

【學位授予單位】：陜西科技大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TS733.2

【參考文獻】

相關期刊論文 前10條

1 湯偉;楊鵬飛;黨世紅;;置換蒸煮偏流問題的分析與解決辦法[J];中國造紙;2016年11期

2 湯偉;楊鵬飛;黨世紅;;置換蒸煮卸料泵的汽蝕分析及解決辦法[J];中國造紙;2016年09期

3 周林;黃創新;;低能耗蒸煮技術改進的效果[J];紙和造紙;2016年07期

4 湯偉;楊鵬飛;黨世紅;;置換蒸煮鍋溫度測量方法的改進及鍋內溫差控制[J];中國造紙;2016年07期

5 何金平;解愫瑾;;間歇蒸煮生產溶解漿工藝控制[J];中國造紙;2015年10期

6 湯偉;于東偉;張怡真;黨世紅;王鋒;;基于遞推PLS的置換蒸煮終點軟測量建模研究[J];中國造紙學報;2015年03期

7 逯素平;;簡談DDS置換蒸煮系統安裝施工特點[J];江西建材;2015年15期

8 郭長裕;唐先陸;劉善桂;;改進置換蒸煮的一些思路[J];紙和造紙;2015年05期

9 湯偉;于東偉;黨世紅;王震;甘文濤;;光纖光譜技術在DDS蒸煮終點預測中的應用[J];造紙科學與技術;2015年01期

10 湯偉;甘文濤;黨世紅;王震;于東偉;;基于OPC技術卡伯值軟測量的實現[J];中國造紙;2015年02期

相關碩士學位論文 前6條

1 張秦;基于PCS7的溶解漿DDS控制系統設計與應用[D];陜西科技大學;2013年

2 黃俊梅;置換蒸煮（DDS）過程蒸煮終點軟測量的研究[D];陜西科技大學;2011年

3 沈正華;紙漿間歇蒸煮參數優化方法研究[D];浙江大學;2011年

4 丁永奎;桉木與竹子混合置換蒸煮（DDS）的研究[D];廣西大學;2008年

5 范黎;麥草黑液置換蒸煮后黑液降粘及其機理研究[D];南京林業大學;2008年

6 范興剛;蘆葦置換蒸煮及無氯漂白的研究[D];天津輕工業學院;2000年

，

本文編號：1844030