超聲波輔助飛秒激光加工光纖材料的工藝探索
[Abstract]:In order to study the effect of ultrasonic vibration on femtosecond laser micromachining, an ultrasonic auxiliary device was designed to test the microstructure of quartz fiber materials. The effect of ultrasonic vibration with different power on the surface quality and hole depth of materials was discussed, and the mechanism of ultrasonic assisted femtosecond laser machining was clarified. When ultrasonic vibration is introduced, the wall of the rectangular groove ablated on the side of the fiber is more flat, the residual debris is reduced obviously, the depth of the groove or hole is increased, and the taper of the hole decreases from 7.34 擄to 4.17 擄when the ultrasonic power is 30 W. The results show that ultrasonic vibration can effectively improve the surface quality of materials, increase the depth of holes and improve the processing efficiency of femtosecond laser. It is proved that ultrasonic vibration can improve the machining efficiency of femtosecond laser.
【作者單位】: 武漢理工大學光纖傳感技術國家工程實驗室;
【基金】:國家自然科學基金(51175393,61475121) 湖北省自然科學基金(2014CFB260)
【分類號】:TN249
【相似文獻】
相關期刊論文 前10條
1 陳艷,曉晨;飛秒激光加工[J];激光與光電子學進展;2001年03期
2 邱建榮;飛秒激光誘導材料內部三維光功能微結構新進展[J];物理;2003年09期
3 車會生;飛秒激光及其應用[J];激光與光電子學進展;2003年08期
4 朱佳斌,陳建平,李儒新;飛秒激光與水相互作用的現象與研究進展[J];激光與光電子學進展;2003年11期
5 楊建軍;飛秒激光超精細“冷”加工技術及其應用(I)[J];激光與光電子學進展;2004年03期
6 楊建軍;飛秒激光超精細“冷”加工技術及其應用(續)[J];激光與光電子學進展;2004年04期
7 劉美紅;飛秒激光在玻璃中制作微孔[J];激光與光電子學進展;2004年04期
8 王亞非;飛秒激光加工機[J];光機電信息;2004年05期
9 孫曉慧,周常河,余f:鯤;飛秒激光加工最新進展[J];激光與光電子學進展;2004年09期
10 劉萍;飛秒激光直寫計算機產生全息圖[J];光機電信息;2005年09期
相關會議論文 前10條
1 魏志義;王兆華;田金榮;令維軍;賈玉磊;張軍;韓海年;王鵬;孫敬華;鄭加安;張杰;聶玉昕;;飛秒激光功能擴展及精確控制[A];第六屆全國光學前沿問題研討會論文摘要集[C];2003年
2 曾紹群;;飛秒激光的聲光掃描與神經活動觀測[A];2006年全國強場激光物理會議論文集[C];2006年
3 徐楠;吳成印;吳志峰;梁青青;楊宏;龔旗煌;;分子的飛秒激光取向操縱[A];2006年全國強場激光物理會議論文集[C];2006年
4 蔣紅兵;鐘鳳嬌;龔旗煌;;分子取向?qū)︼w秒激光傳輸?shù)挠绊慬A];第八屆全國光學前沿問題討論會論文集[C];2009年
5 魯欣;張U,
本文編號:2375349
本文鏈接:http://www.wukwdryxk.cn/kejilunwen/dianzigongchenglunwen/2375349.html